Hey I'm thinking about lifting my 2002 Liberty. Need suggestions and information. How can I do a 2.5" lift front and back and have the front higher than the back? Already sits 1/2" lower. 2.5" spacer in front and back with a 1/4" strut spacer? or 2.5" spacer in front with 2" spacer in back? Need some suggestions. Also do I have to get new springs, upper control arms etc. and what would be the biggest tire i could use with no rub? Thanks!!

2002 Liberty 4x4 138k miles

1. Welcome!
2. Where in Indiana are you from?
3. Spacers will wear out your spring and shocks faster. Better to go with new shock and springs made for a lift.

Laporte!
and okay thanks. how fast would they wear out?

I bought it back in July and ive had my share of problems with it. 3 radiators. I dont want to spend much money, and i dont plan on having it for more than a couple years, but i dont like how low it is so i wanna do something without spending too much. I was thinking for like $200 I can use spacers. I have no experience with lifting things though.

LaPort is close to me I think. I live in Elkhart. I could help you with it or you could check out my lift first. I owned a spacer lift and trust me you won't be happy

We have great info on lifts if you take the time and do some reading,
then after you figure out your budget,
how high you want to lift etc
we can help from there


Welcome

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited