new Alberta member

PZKW108 · **Joined:** Sun Apr 06, 2014 5:23 pm **Posts:** 461

Hi my name is Seb, I'm in Edmonton Alberta.
I bought a 2005 Liberty CRD limited a couple month ago , it was in a rough shape, the brake were on metal the shocks were leaking the alternator pulley was noisy.....

I aready spend lots of hours on the little beast, I change all the fluids,the brakes,Alternator took the whole front end apart to change the timing belt and realized it was done already !!! I clean and fixed a crack in the intercooler, replace the clutch fan for a electric one.
I did the helefant hose mod as well as the ORM and now running GDE eco tune. I have a OME suspention kit on order, I replace the airbox with a cone type filter to have room for a ARB air compressor under the hood. I did a bumper cut out and fabricated a dual hitch rack on the front end that will get an extra skid plate bolted between the oem one and the rack and I reinforce the OEM.

I now have a deffective injector, the motor run on 3 cylinder. I will make a puller this week and hopefully wont have too much trouble taking it out. ( any suggestion will be apretiate )

Seb

lfhoward · **Posted:** Fri Jun 13, 2014 9:02 am

Welcome to LOST, :JEEPIN:

new Alberta member

Who is online