Hello from Phoenix, Az.

Jeeperz N Az · **Joined:** Tue Aug 19, 2014 11:20 pm **Posts:** 7

Hello all. Just got a 2012Jeep Liberty Limited. Already put a 3inch lift, front and rear Steelcraft bumper guards, 255 AT3's, and skid plates, and rock rails. Do a lot of Coyote and other predator hunting, so if you're up for a hunt or just wheeling around give me a holler.

Gageraid · **Posted:** Tue Aug 26, 2014 12:57 am

Welcome! How about a picture?
What brand lift did you go with?
Feel free to read, read, and READ. Lots of info here.
We have all the answers to your questions here.

Jeeperz N Az · **Joined:** Tue Aug 19, 2014 11:20 pm **Posts:** 7

Will work on the pics tomorrow. The lift is a Rocky Road. Had to do a bit of cutting and some grinding to get the 255/75's in. Thanks for the welcome.

Gageraid · **Posted:** Tue Aug 26, 2014 12:05 pm

Ouch, not the best lift kit out there. Are you running 16 or 17 inch rims?
You'll notice that the majority who is lifted on the forum uses OME or JBA springs along with OME or Bilstein shocks.

Jeeperz N Az · **Joined:** Tue Aug 19, 2014 11:20 pm **Posts:** 7

Yeah got 17 in rims. I saw the more preferred lifts after the fact, so to speak. Before anymore mods I plan on consulting on the forum first.

Gageraid · **Posted:** Thu Aug 28, 2014 12:14 am

Jeeperz N Az wrote:

Yeah got 17 in rims. I saw the more preferred lifts after the fact, so to speak. Before anymore mods I plan on consulting on the forum first.

Good idea... At least one or two forum members have had that lift then switched to a "real" lift after they could afford it.

Hello from Phoenix, Az.

Who is online