I bought a set of 500's and for the life of me i cant figure out how to get them mounted on the front bumper without pulling the darn thing to get at the metal under it. I would like to know how others have mounted them up with the supplied hardware on the bumper. Thanks for all the help in advance.

I made a simple light bar that goes across the front, then secured it with metal drywall anchors. Only the plastic supports it, but there is no wobble at speed or anything. It's a strudy setup...

_________________
-oooooo- ---Craig, L.O.S.T. #CT068103
/______\ ---http://jeep.allgris.com
O||||||||O ---'02 Sport 4x4, 5-spd,
[]--------[] ---2.5" BDS lift, 245/75/16 MT/Rs, Moab Rims, Locked and Regeared!
[]_____[] ---The list got to long, go to my web site for more!

here's what i did... just went to lowe's and bought some angle iron and used screws to screw the brackets in. no wobble at all, and if i wanted to take the whole thing off, you can barely tell there are holes there!
and yes, i need to touch-up the paint, but i will do that when it stops raining.. if that ever happens!

well thanks for the information but i figured out how to get um ancored to the metal yesterday. I will be posting a tech article about the install in the tech section. But i do want to know where you got you d rings from. An did you have to modify them to get them on there?

here is a write up on the shackles...http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=9316&sid=ba4edfa8a7e9c2458888e992ec41f250

allright everyone im working on making a word write up on the install. Its ony for the earlier style liberty. I shold have posted on her in a few days or so if time permits.

Im also going to be working on a "stock" apearing center compartment mounting for a CB. That is once i can find one that will fit and still has a good quality signal for its size. So if anyone has some suggestions give um to me so i can get it all worked out. Also for anyone else that uses a Garmin Rino series GPS/Radio im fabing up a swivel mount for the dash.