I need to run COAX from my gearshift down to my rear window and out the back.
How can i do this?
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Running Coax for CB http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=45&t=27822 |
Page 1 of 1 |
| Author: | MiniDevil [ Sat Dec 22, 2007 12:05 pm ] |
| Post subject: | Running Coax for CB |
I need to run COAX from my gearshift down to my rear window and out the back. How can i do this?
|
|
| Author: | Hood297 [ Sat Dec 22, 2007 5:22 pm ] |
| Post subject: | |
I recommend running from 1. under gear shift to 2. under center console from there 3. under the carpet to the door seal plastic stuff. then to 4.the back pushing the coax under the plastic interior trim along the way 5. then under rear swing gate weather stripping to roof. |
|
| Author: | jelohead [ Sat Dec 22, 2007 5:24 pm ] |
| Post subject: | |
under the carpeting from the front, under the driver's seat, under the drivers side plastic floor/door sill moldings, around the rear seat, and out the back thru the trunk area |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|