so i got my new wolo air horns, and i got some questions!!

1. where is the write up on someone's install?
2. can i just connect some more wire to the old horns and not use the relay?
3. does it matter how the horns are positioned? slightly tilted so water does not get sucked up or anything, or how the compressor is mounted?

THANKS!!!

I'm not sure where to find the write up on an install.

But I would say that extending the wires from the stock horns would work fine as long as your not adding like 10 feet or anything crazy.

And yes, defiantely give them a slight tilt down, or forward (depending on mounting) it doesnt have to be alot. The compressor (Im assuming its direct drive (no tank)) mounting shouldnt matter, just somewhere that doesnt get alot of dirt/water on/in it.

_________________
2003 limited 3.7L V6
Vader Edition

http://www.cardomain.com/ride/3219059

They have a sale going on right now on the WOLO Bad Boy Air Horn #94117 118dB 530/680Hz for $34.99 it anybodys interested the price is right I'm not sure how loud the are.
Later

_________________
LEAD FOLLOW OR GET OUT OF THE WAY
2002 Sport 4x4 3.7 L w/auto
Amsoil from bumper to bumper, Amsoil Air Filter
PIAA head light bulbs, Fog Light switched out to SilverStar 9005's
MagnaFlo Muffler, New Radiator, Rebuilt A/C system,Rebuilt Rear Diff, LBJ's twice
Dunlop 245/70-16 Rover AT