BjBnet wrote:
the light in the dash doesn't come on. It's not burnt out cause when I do the instrument cluster test all the icons light up.
Sooooooo, I'm assuming the light bar was installed afterwards by the previous owner. It's the original Mopar one.
Anybody here know how I tap into things to get the light to come on when the lights are on? The switch is the original one which is tapped into the fuse box, so I need to know where to go from there
Thanks for any help
Well since you have stated in your sig that you don't have a Renny then the light bar was a added later on.In that case the light in the dash will not work unless you tie into the BCM/cluster wiring.My Renny light bar that I added to my Limited came with a little LED light to signal that the light bar was on(by intructions to be placed close to the cluster,I mounted mine next to the switch),but if you need a little light to tell you the light bar is on you got some issues,even more if at night.