I have the 02 infinity system in my Jeep. All but the tweeter on the drivers side is blown (from previous owner.) I want to pick a new component set but I'm not sure what the factory impedance is from that system. I was also wondering where I could find schematics for the whole set up. Thanks in advance for any help!!

_________________
04 Silver Subaru Forester 2.5XT turbo (300+ AWHP)
02 Green Jeep Liberty Limited (OME lift, with MOABs)
Liberty pic --> http://www.sixthsphere.com/storage2/ima ... mlff6d.jpg

pretty sure 2 ohm but running 4 ohm is the norm. run 4 ohm to be safe plus you won't find many components that are 2 ohm.

_________________
06 Liberty Sport 2wd Manual 6-Speed.
Mods:
Excessive Amperage custom 200amp alternator
Yellow Top Optima Battery
RE XXX 12 subwoofer in 2.5 cubic ft slot vented box tuned to 32 hz
Earthquake PHD5000w amp
Earthquake 2 channel amp
MTX 6001 axe seperates 6 1/2 front speakers with 1" soft dome tweeters

yea, All i had been finding were 4 ohm and I was pretty sure that the head unit wasn't and I also know that some manufactures use 8 ohm so I wanted to be sure. This is my first Chrysler ever so I figured better safe than sorry. Thanks for the info!!

_________________
04 Silver Subaru Forester 2.5XT turbo (300+ AWHP)
02 Green Jeep Liberty Limited (OME lift, with MOABs)
Liberty pic --> http://www.sixthsphere.com/storage2/ima ... mlff6d.jpg