I like the looks of these for taillight and brake lights.





Looks like this in the housing (this is a Dodge Charger housing):


Shown on, then brake light on:


Pic doesn't work, about 75% down the page here:
http://www.webbikeworld.com/r3/spider-led-light/

Seems to be only in 3157, may have to do some spicing from my stock
bulb sockets (3157) to my aftermarket sockets (1157).

http://www.automotivelightstore.com/ind ... tegory=902

_________________
Tom (& Cody, that's my dog)
02 Black KJ LTD, 6/01
lots of stuff...can always use more



Previous: 95ZJ 92XJ 90XJ 80CJ5

depends on the plastic on the tail light housing, whether you'd really get a similar effect (they do make custom aftermarket tail light housings that are clear though)

i have led tail light bulbs (non-spidered) and i can't really distinguish the bulb inside of it like what's in that picture because of the red tinted lens

but.. even so they're brighter and crisper in color than the stock bulbs so either way win win

on another note, i do believe i recall spider bulbs being avail in 3157

_________________
03 Renegade (Black)
177k miles 3.7L gas - 45RFE
Command Trac / 4.10s
Lift: ft. 790+ rr. JBA4+
The last of the TrailReady Front&Rear Bumpers and TR Rock Rails
Jarhead Offroad light covers
31x10.5R15 RedLetter Grabbers on Blackrock Dunes
L.O.S.T #KD098632