| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| switch help... anyone... http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=45&t=56484 |
Page 1 of 1 |
| Author: | riptricket [ Tue Oct 26, 2010 4:02 am ] |
| Post subject: | switch help... anyone... |
I want to use a dpdt switch, I think, to be able to have lights come on with another set, but still be able to throw on the set at anytime. Would this be called a momentary dpdt switch? Thinking of going with the bay for it, but it is dicey thinking that I might get a crappy one. Thanks for the help! |
|
| Author: | TAHOE [ Tue Oct 26, 2010 11:08 am ] |
| Post subject: | Re: switch decision... |
I think a "momentary" switch is one that you would have to hold for it to stay on, You need a standard dpdt switch. I've got to get one too so I can install back up lights that will come on in reverse or when I want to turn on separate. |
|
| Author: | riptricket [ Tue Oct 26, 2010 2:09 pm ] |
| Post subject: | Re: switch decision... |
will this work? http://cgi.ebay.com/DPDT-Toggle-20-amp-Switch-Center-Off-ON-OFF-ON-K203-/120636374364?pt=Model_RR_Trains&hash=item1c167cfd5c |
|
| Author: | infernicus [ Tue Oct 26, 2010 2:31 pm ] |
| Post subject: | Re: switch decision... |
I think that might work, I think it is good to control two sets of lights. Not 100% sure. This is how I wired mine. viewtopic.php?p=478384#p478384 -One is to have the lights come on automatically when triggered by another power source, ie: reverse lights/parking lights. -Two is off all the time -Three is turn them on independently. Good luck! 
|
|
| Author: | riptricket [ Tue Oct 26, 2010 2:33 pm ] |
| Post subject: | Re: switch decision... |
ya I am trying to reswitch my under jeep lights... I want it to be able to be in 1-on with cab lights, 2-off, 3-on by itself. Does that help a little bit more? |
|
| Author: | riptricket [ Wed Oct 27, 2010 2:45 pm ] |
| Post subject: | Re: switch decision... |
This is the switch I got...  Okay, so I don't burn/blow fuses... follow me here and make sure I am doing this correctly Switch like this LoadA2 LineA LoadA1 LoadB2 LineB LoadB1 So that's where I am... help! I am trying to do this... make the under jeep lights turn on by themselves with the bottom throw, and then have under jeep lights turn on with in-cab lights for top throw, and center off-meaning cab lights still work but under jeeps are off... Does that make sense? Thanks for the help! |
|
| Author: | riptricket [ Wed Oct 27, 2010 8:24 pm ] |
| Post subject: | Re: switch decision... |
anyone... |
|
| Author: | riptricket [ Sat Oct 30, 2010 4:22 am ] |
| Post subject: | Re: switch help... anyone... |
seriously!!! |
|
| Author: | JL Rockies [ Sun Oct 31, 2010 11:48 pm ] |
| Post subject: | Re: switch help... anyone... |
Do you intend to used relays or do you intend you run heavy gauge wire x3? Not enough information is known for anyone to give you non-fire-starting advice. |
|
| Author: | riptricket [ Mon Nov 01, 2010 5:00 am ] |
| Post subject: | Re: switch help... anyone... |
the lights are smds... so no power really going through them. |
|
| Author: | riptricket [ Tue Nov 02, 2010 7:13 pm ] |
| Post subject: | Re: switch help... anyone... |
hmm... guess I am just going to try it with some extras that I have and hope I don't blow them! hehe |
|
| Author: | VoodooMann [ Tue Nov 02, 2010 8:20 pm ] |
| Post subject: | Re: switch help... anyone... |
easy way. run a relay. one set of contacts: wire like a standard switch. 12v power into switch, switch out to lights. second set of contacts: on the battery side. 12v to relay, relay to switch, relay sense wire runs to the desired trigger (cab lights/reverse/parking lights etc.). then from relay to switch. I have a wiring diagram around somewhere. I wired my roof rack lights this way: (I used a fuse panel with a heavy gauge hot wire straight to the battery) fuse panel to split-y connector (one wire into two) one side of Y to the switch, then out to the lights, other side goes to the relay. relay's sense wire runs to a tap-splice into the High beam power wire at the headlight. relay's output goes to the other side of the switch, then out to the lights. center terminals are obviously neutral. top position is always on center is off down position causes roof lights to engage when high beams are activated. perfect for back country roads at night. |
|
| Author: | riptricket [ Tue Nov 02, 2010 10:14 pm ] |
| Post subject: | Re: switch help... anyone... |
So for my situation, I have in-cab courtesy lights, switch, and under jeep lights. Explainaaa some-morea! Bad Italian I know. Thank you |
|
| Author: | VoodooMann [ Tue Nov 02, 2010 10:36 pm ] |
| Post subject: | Re: switch help... anyone... |
How to do yours: fuse panel (if you want to use one) or Fused 12v from battery (power supply) to split-y connector (one wire into two) one side of Y to the switch, then out to the lights, other side goes to the relay. relay's sense wire runs to a tap-splice into the in-cab lights power wire relay's output goes to the other side of the switch, then out to the lights. so you will have: position #1 : ON center: OFF Position #2 : ON with courtesy lights |
|
| Author: | riptricket [ Wed Nov 03, 2010 3:53 am ] |
| Post subject: | Re: switch help... anyone... |
so there are 6 "poles" on the switch... Which ones do I use?
|
|
| Author: | VoodooMann [ Thu Nov 04, 2010 9:47 pm ] |
| Post subject: | Re: switch help... anyone... |
Each side is one set/pair/group/side/etc. of lights (or at least you can think of it that way.) Each negative is out to the lights, one negative will have the relay coming off of it, then to the lights. the other will go straight to the lights. the center is where your fused 12v HOT will go. (it is a common hot) |
|
| Author: | riptricket [ Mon Nov 22, 2010 12:26 pm ] |
| Post subject: | Re: switch help... anyone... |
Okay I am still having trouble... don't want to burn up my smds b/c I then have to glue... yes... new ones on. so I can hookup the under jeep lights to one side, and then for the other side of the switch, both the under jeeps and cab lights and that will make one throw under only, and the other throw unders and cabs right? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|