Got my EVIC installed today. Everything works 100% except the temp. It shows "--". I have a 2005 KJ and the EVIC is from a 2004, so it should work. Anyone have any idea how to get it to work?

TIA

_________________
Zack A.
2005 Rocky Mountain Ed.
W4ZWA

do you have the temp temp sensor installed

_________________
With enough fabbing, time & $, it's certainly possible.
That being said, it's like boinkin' your sister...just because you can, doesn't mean you should.

do you have the temp temp sensor installed

_________________
With enough fabbing, time & $, it's certainly possible.
That being said, it's like boinkin' your sister...just because you can, doesn't mean you should.

yep

_________________
Zack A.
2005 Rocky Mountain Ed.
W4ZWA

I got the same problem, everything else works but the temp... i even wired it into the correct factory connector in the left rear quarter panel to the correct pins but still not temp only "--"!!!!

_________________
2005 Liberty CRD sport
FrankenLift with JPA's UCA
Moab wheels with General Grabber AT2 tires
Bull nose push bar with KC Daylighters
Mopar light bar
Cobra anniversary CB
full skids
GDE Hot tune & GDE TCM tune
Euro TC

if you get a evic out of a WJ grand the temp will only work in a 02 - 04 liberty if you drive a 05 - 07 liberty you will need to find an evic from a 05 -07 for the temp to work

_________________
With enough fabbing, time & $, it's certainly possible.
That being said, it's like boinkin' your sister...just because you can, doesn't mean you should.