| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Help problem with deck and all Gauges and electronics. http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=45&t=60708 |
Page 1 of 1 |
| Author: | jeep4life7 [ Sun May 15, 2011 4:21 pm ] |
| Post subject: | Help problem with deck and all Gauges and electronics. |
Ok so i bought a new deck today and after taking out the last one (kenwood). Then after i hooked up the new jvc and then turned my key just to get power and every gauge spedo and all went all the way up then back down. Also the automatic locks do not work eather. |
|
| Author: | JL Rockies [ Mon May 16, 2011 11:24 pm ] |
| Post subject: | Re: Help problem with deck and all Gauges and electronics. |
I've installed thousands of decks in my long career and I never had that happen.... hopefully, you just blew a fuse.... hopefully. The biggest rookie mistake is using the illum wire for ground and maybe you fried the BCM or some such computer by doing so. |
|
| Author: | jeep4life7 [ Wed Jun 01, 2011 4:08 pm ] |
| Post subject: | Re: Help problem with deck and all Gauges and electronics. |
im back finnaly been gone for awhile. i just had a bad ground on the wiring harness it works now. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|