I finally found a good place to get a ground for things like a CB or other electronic device.

Pop down the knee bolster and you'll see some long bolts sticking up off something on the steering. There's already a nut on it, but plenty of extra bolt sticking out (2 or 3 more nuts would fit).

I got a circle crimp connector for the ground wire and put that over the bolt and tightened it down with an 8mm x 1.25 nut (and lock washer). Perfect! and no need to use the seat bolts.

Also, that add-a-fuse thing is great.

Still haven't found a perfect solution for what type of connector to use to attach the CB, but the one I am using now is a Vanco Quick Disconnect 2-pin (part #BL1). It's a short lead with a connector on each end, I just cut it in half and soldered them onto the wires. The guy at the place I got it from said that they didn't have the individual connectors for it anywhere.


http://www.vanco-online.com/index.php?main_page=product_info&cPath=misc&products_id=101320

_________________
Jeff 2005 Jeep Liberty Renegade
4x4, 6spd, Leather, Sunroof, trak-loc, skids/rails, hitch+shackle, hooks, Alpine/iPod, Thule, GPS, CB, Frankenlifted w/ 31" MTRs
Photos Cardomain