What are the torque specs needed for the replacement of the timing belt on '05 Liberty CRD?

For which part?

If you want someone to type out all the torque specs for all the bolts involved, well that'll have to be someone else.

There is a link in the Noob Guide where you can download the entire service manual which provides all the torque specs for the timing belt process, but you have several bolts which need to be torqued in that process, a list would be tedious to say the least.

If you need any other pointers or have any other questions, feel free to ask.

_________________
Silver 2006 KJ 2.8L CRD Limited:
GDE ECO Tune / Fumoto Valve / E-Tecno GX3123 7v Glow Plugs / 2nd Gen Fuel Head / Mishimoto RED Hoses / Rockers/Lifters @ 114k / Hayden FC + 11 Blade Nylon / Sears P1 Battery / Transgo 45RFE-HD2 Reprogramming Kit / Timken Front Bearings

These are most of the specs...

for anyone who needs them

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount
98 Dodge Cummins 24 Valve

I was thinking of torque specs for the whole job, not just the timing belt cover and parts past when you take off the whole serpentine belt assembly, tensioner, Crank, etc.

Guess I've done too many top ends.

_________________
Silver 2006 KJ 2.8L CRD Limited:
GDE ECO Tune / Fumoto Valve / E-Tecno GX3123 7v Glow Plugs / 2nd Gen Fuel Head / Mishimoto RED Hoses / Rockers/Lifters @ 114k / Hayden FC + 11 Blade Nylon / Sears P1 Battery / Transgo 45RFE-HD2 Reprogramming Kit / Timken Front Bearings