Aw crud, you're gonna make me go look aren't you?

Just used what was handy, a 3/8" drill bit, and spaced them roughly 2" apart vertically between the ribs on the outside of the box. I'd guesstimate somewhere around 12 to 15 holes.

I was pretty conservative as far as the size and number of holes - wanted to make sure there was enough left of that side of the box so it would still be structurally sound. And not to put so many holes that that became the primary air inlet.

_________________
Mitchell Oates
'87 MB 300D Diamond Blue Metallic
'87 MB 300D - R.I.P. 12/08
'05 Sport CRD Stone White
Provent CCV Filter/AT2525 Muffler
Stanadyne 30 u/Cat 2 u Fuel Filters
Fumoto Drain/Fleetguard LF3487 Oil filter
V6 Airbox/Amsoil EAA Air Filter
Suncoast TC/Shift Kit/Aux Cooler
Kennedy Lift Pump/Return Fuel Cooler

Thanks! All common sense, but nice to hear before I begin....

_________________
2006 Dk. Khaki Limited (BD 4/18/06)
-Mopar Tow Pkg. and Skids
-Magnaflow
-Fumoto Valve
-Provent 200, ORM
-Rotella T 5w/40
-V6 Air Box
-245/70/16 Cooper Discoverer CTS
-Amsoil EAA201 air filter