electric fan in transmission cooler

thermorex · **Posted:** Sun Sep 07, 2014 9:02 pm

Rich wrote:

thermorex wrote:

I do not know anything about aftermarket, but I hear that there are some aluminum ones pretty tough and well made. Pm tjkj2002, I bet he can provide great advise. I do not remember who in the crd forum installed those skids unfortunately... Audiboy?

If you are talking about the Asfir plates like the one seen below, they are nice, fit beautifully and take more of a hit than I thought they would.

Sadly, you may have missed the bus. The US distributor for Asfir went under, so to get one you have to contact the main office in Israel.

There is NO chance of fitting anything larger than the stock pan in there. I can't even run a Napa 1515 filter, as it is too tight and the filter hits the skid.

Yes Rich, I believe that's the one, thanks. I was thinking more for jrsavoie, I one already have the oem skids and don't need others as I don't do serious offroading with this jeep.

jrsavoie · **Posted:** Tue Sep 09, 2014 4:52 pm

thermorex wrote:

Rich wrote:

thermorex wrote:

I do not know anything about aftermarket, but I hear that there are some aluminum ones pretty tough and well made. Pm tjkj2002, I bet he can provide great advise. I do not remember who in the crd forum installed those skids unfortunately... Audiboy?

If you are talking about the Asfir plates like the one seen below, they are nice, fit beautifully and take more of a hit than I thought they would.

Sadly, you may have missed the bus. The US distributor for Asfir went under, so to get one you have to contact the main office in Israel.

There is NO chance of fitting anything larger than the stock pan in there. I can't even run a Napa 1515 filter, as it is too tight and the filter hits the skid.

Yes Rich, I believe that's the one, thanks. I was thinking more for jrsavoie, I one already have the oem skids and don't need others as I don't do serious offroading with this jeep.

I like the looks of that. I would need to add on to cover the FS2500 or that could be separate. Thanks

thermorex · **Posted:** Tue Sep 09, 2014 9:35 pm

jrsavoie wrote:

thermorex wrote:

Rich wrote:

[quote="thermorex"]I do not know anything about aftermarket, but I hear that there are some aluminum ones pretty tough and well made. Pm tjkj2002, I bet he can provide great advise. I do not remember who in the crd forum installed those skids unfortunately... Audiboy?

If you are talking about the Asfir plates like the one seen below, they are nice, fit beautifully and take more of a hit than I thought they would.

Sadly, you may have missed the bus. The US distributor for Asfir went under, so to get one you have to contact the main office in Israel.

There is NO chance of fitting anything larger than the stock pan in there. I can't even run a Napa 1515 filter, as it is too tight and the filter hits the skid.

Yes Rich, I believe that's the one, thanks. I was thinking more for jrsavoie, I one already have the oem skids and don't need others as I don't do serious offroading with this jeep.

I like the looks of that. I would need to add on to cover the FS2500 or that could be separate. Thanks[/quote]
You're welcome, but Rich deserves all the credit

.

electric fan in transmission cooler

Who is online