CRD ECU maps & tuning

Yeti · **Posted:** Wed Feb 19, 2014 12:26 pm

nik , your kj it's an automatic ? i have see a difference in the torque on the gear and another difference in the 3° 4° 5° gear , seem the shifting point , it's possible ?

Squeeto · **Posted:** Wed Feb 19, 2014 5:11 pm

toy_vw wrote:

from what Ive come across 05 and 06...here in North America all Use EDC16C31

I have a North American (Canadian) '06 and it seems to be EDC16C/C2

I can't get past this screen though.

nicktb · **Joined:** Mon Oct 28, 2013 12:52 pm **Posts:** 65

It must be outdated or using old drivers/plugins...

That ECU software version is the same one I have, so the ECU must be a Bosch EDC16C31.

Squeeto · **Posted:** Wed Feb 19, 2014 6:20 pm

I checked with ECM Titanium and the CXXX_808 driver says that it is for
Jeep Cherokee 2800 CRD 163CV Bosch EDC 16C2-9.9X

Maybe only the '05 used the EDC16C31?

I know that if I use my software and choose EDC16C31 it still can read the ECU (that part of the id request must be the same) but my ECU still pumps out EDC16C/C2-9.9.

Edit- Just checked again. There is no option for EDC16C31. I have an EDC16CP31 option under Jeep and Mercedes but this won't identify.
What will identify is the EDC16C/C2 option under Mercedes.

nicktb · **Joined:** Mon Oct 28, 2013 12:52 pm **Posts:** 65

Yes, ECM shows that for the 808 driver, and you have the 808 software, same as me (on my 2006), and the Program shows the ECU as the EDC16C31. So you should have the same ECU. I could be wrong, but I think the ECM driver matches up the ECU via the software that is loaded on it. I have 3 jeep CRD's here. 2 are 2005 with the 811 software on the EDC16C31 and the 2006 has the 808 software also on the EDC16C31, even though the 808 driver shows Bosch EDC 16C2-9.9X.

I just double checked with ECM, the driver for the 808 shows what you posted, however, when I load the original 2006 tune into ECM, it see's that it is the 808 after a search, and when you hit the "Info" button this is what it displays:

Bosch
EDC16C31
1037380808

Not trying to argue lol, just letting you know what I am seeing...

Squeeto · **Posted:** Wed Feb 19, 2014 8:42 pm

Absolutely, no argument. Just trying to get to the bottom of this.

When you mod a bin, are you asked to enter any ecu information?
When you enter the stock bin, does the info button also show EDC16C31?

nicktb · **Joined:** Mon Oct 28, 2013 12:52 pm **Posts:** 65

When I mod it, I do not enter any kind of ECU info, nor does it ask me to. I just make changes to the maps and paths. And yes, when I load the stock tune the "Info" button shows EDC16C31.

Squeeto · **Posted:** Wed Feb 19, 2014 11:44 pm

I wonder if the file would change if you read the ecu with MPPS selecting:

Chrysler PT Cruiser 2.2L CRD Bosch EDC16C2-9 K-Line/CAN

nicktb · **Joined:** Mon Oct 28, 2013 12:52 pm **Posts:** 65

Try it, if it reads it, send it to me and I will compare it to my stock 808 file and see if there are any differences.

Yeti · **Posted:** Thu Feb 20, 2014 10:03 am

it's a software problem , i use Powregate from alientech and when i made an ECU ID , the hardware said EDC16C-C2 9X9 when i load the file in winols or titanium , said edc 16c31

Squeeto · **Posted:** Thu Feb 20, 2014 11:03 am

nicktb wrote:

Try it, if it reads it, send it to me and I will compare it to my stock 808 file and see if there are any differences.

Sorry, I was hoping you would try.
My flasher only id's the ecu and it gives the same edc16c/c2-9.9 message if I choose edc16c/c2 or edc16c31.

Yeti wrote:

it's a software problem , i use Powregate from alientech and when i made an ECU ID , the hardware said EDC16C-C2 9X9 when i load the file in winols or titanium , said edc 16c31

Maybe Alientech is wrong! It doesn't seem to matter though. The hardware and software work for both of you.
I have ordered a cheap China clone :frankie:

Yeti · **Posted:** Thu Feb 20, 2014 12:06 pm

Squeeto wrote:

I have ordered a cheap China clone :frankie:

what clone ?................china ? but are you SURE ?

Squeeto · **Posted:** Thu Feb 20, 2014 1:50 pm

Yeti wrote:

what clone ?

The same one as Nick.

Yeti wrote:

but are you SURE ?

If it consistently reads, I am not worried about the write.

Yeti wrote:

Yeti · **Posted:** Thu Feb 20, 2014 1:56 pm

Yeti · **Posted:** Fri Feb 21, 2014 10:51 am

toy_vw had no promblem and happy with the file and me too , no dtc are present , hope can said a word of this tune

Yeti · **Posted:** Sat Feb 22, 2014 6:24 am

Nick one information , you intend to physically remove the FCV ?

only to be sure i have made the right tune for you

nicktb · **Joined:** Mon Oct 28, 2013 12:52 pm **Posts:** 65

Yes, in the tune I made for the 2005 I am removing it. On the tune you sent me for the 2006 (808) I will be removing too. if the tune you sent me is does not have the FCV delete, I will add it in...

Yeti · **Posted:** Sat Feb 22, 2014 10:16 am

nicktb wrote:

Yes, in the tune I made for the 2005 I am removing it. On the tune you sent me for the 2006 (808) I will be removing too. if the tune you sent me is does not have the FCV delete, I will add it in...

yes i have delete , but i dont know if work with out it pulled , i have disabled the shot down function too , let me know if work like you want

nicktb · **Joined:** Mon Oct 28, 2013 12:52 pm **Posts:** 65

Thanks will do.

toy_vw · **Joined:** Sun Aug 04, 2013 2:50 pm **Posts:** 35

My file has been great

Im off to work but things have been awesome....the file off my 06 has the maf open dtc and fcv open dtc zeros out...so you can disconnect the fcv and the maf and no fault...

CRD ECU maps & tuning

Who is online