Sorry no picts, I was riding my bicycle at south mountain park today. Sebring and I think a Town and Country if it was a Nitro that thing is small. They had a Ram and Van parked to somewhat hide them while they put air in the tires. All of the vehicles had Michigan manufacture plates and the sebring was painted flat black and had a trailer hitch on it. The minivan was mostly covered in black plastic. Today it was a beautiful 90 degrees, I hope this wasn't a temperature test of the vehicles. South mountain park isn't a great place to test cars due to a 35 mph speed limit and 15 mph in every blind corner (nearly every turn in the road). They could use balsa wood for lower ball joints in those conditions. I guess thats how dc tests their vehicles.

_________________
'06 White Limited CRD born on 08/05 37k miles F37'd
mods:: vented, exhausted, ORM, cat 2, Lifted
Other Rides:: CJ7 Limited, and many bikes

So which ones were CRD's?

_________________
2005 Liberty Sport CRD w/all the fixings
Elephant Hose, MAF (ORM), Amsoil Airfilter, nice when I get to drive it
1 EGRreplacement, but never again.
99.5 FrankenJetta TDI (R.I.P.): being turned into diesel hybrid!
99.5 Replacement Jetta TDI: deal of a lifetime, EHM, some other stuff

I would say it was the nitro in heavy camouflaged. After looking at the wheel pattern, it was the same as the r/t nitro painted flat black. Couldn't tell if they were crds... is there another place to post here?

Just commenting on DC's Phoenix testing facility. At 35 mph and 90 degrees, I don't see the point. Probably a DC team builder picnic, and take the projects out.

_________________
'06 White Limited CRD born on 08/05 37k miles F37'd
mods:: vented, exhausted, ORM, cat 2, Lifted
Other Rides:: CJ7 Limited, and many bikes