| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Predator installation info/help http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=14306 |
Page 1 of 1 |
| Author: | edon [ Thu Nov 09, 2006 3:32 am ] |
| Post subject: | Predator installation info/help |
Does anyone know what the "extra" wires are for on a Predator module for the CRDs? I thought I read in a post here that they were for a on/off switch, "brake smart" accessory, and output to a display or for future programming but I can't find anything in a search and no instructions came with my module. Perhaps someone with another model of Predator (Ford/Dodge) can help? |
|
| Author: | Toe [ Fri Nov 24, 2006 7:43 pm ] |
| Post subject: | |
I just picked up this module, I have yet to install it. I've been told the wires are for a future data logger so we can see whats going on and you can also wire up a toggle switch to turn off/on the module. |
|
| Author: | BlackLibertyCRD [ Fri Nov 24, 2006 9:37 pm ] |
| Post subject: | |
Toe wrote: I just picked up this module, I have yet to install it. I've been told the wires are for a future data logger so we can see whats going on and you can also wire up a toggle switch to turn off/on the module.
I run the Predator also and don't think the on off toggle is a good idea. The ECM learn to adapt when the predator is plugged in about 100 miles or sooner and will take about the same time to relearn when turned off. In other words no instant results. 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|