Cann't find the darn wire. What color and/or is it marked? Yes, I do have the the factory tow package. Thanks.s:evil:

_________________
08 Elantra SE daily driver
2001 F-250 powerstroke

Should be a baby blue or medium blue wire - it might be taped up in the bundle down by the firewall ...

_________________
2006 CRD Sport 4X4, bought 6 July 2006, born 5/20/2006 1900 hrs.
Mods N Things:
235/70r16 Wrangler SilentArmor, ProVent, Gasser airbox, CAT filter, Kennedy lift pump, fuel cooler, Evic from wrecked 05 KJ, factory skidplates, towhooks, OME 2" CRD lift, Magnaflow 12256 muffler, Alpine stereo & XM "stealth antenna" install

Found a red wire behind a white-like colored plate marked "electric brake". This I take is the wire for the trailer brake, not for the stoplight/brake pedal wire of the brake controller.

_________________
08 Elantra SE daily driver
2001 F-250 powerstroke

If you have the factory tow package all of the connections for the trailer are at the receptacle by your hitch. THe only things that you need to add are for the electric brake controller. If memory serves when I did mine a year ago you run wires directly to the battery for power and ground with a breaker on the hot side. You take one of the remaining two wires and connect it to the appropriate wire on the brake light switch on the steering column under the dash and the other wire to the one in the bundle that you have located. Hook it all togther and you are done.

_________________
Dave

'06 CRD Limited, Lt. Khaki, MOPAR Slush Mats/Skids, DrawTite Front Hitch, Mag Lite, Yakima Bars, Thule Bike Rack, Fumoto, ORM, 245/70 Revo 2

Wish list: Lift, Boulder Bars, Something Bigger in the Front and Back, More Lights

Even if you don't it should still be there. I added the OEM wiring harness for the 7pin connector out back, and still had the red (IIRC) wire plainly labeled for the electric brake.

_________________
Ryan
2006 Ford F-250 PSD CC FX4
**GONE**
2005 Jeep Liberty CRD
SAMCO Hoses//GDE Tune//PML Trans Pan//TransGo HD Shift Kit//MBRP Exhaust

1986 2R Mustang SVO

That's the wire I couldn't find Red with white tracer is the source for the power line that goes back. It should have constant power and a fuse in position 10 under the hood in the power box.

Reguarding your brake wire. Do you have the factory two package or the EVIC? if not you'll have to add the "complimentry" harness to the rear.

Here's a very complete write up on towing wiring on Liberties
http://www.jeepkj.com/forums/viewtopic.php?t=1691

_________________
Atlantic Blue 06 CRD Limited (his)
Joined by a 2000 XJ Classic (hers)