LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Safety Recall - G03 - BLOWER MOTOR
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=21149		 Page 1 of 1
Author:  Me&MyCRD [ Tue May 29, 2007 2:34 pm ]
Post subject:  Safety Recall - G03 - BLOWER MOTOR
Hey All,

Don't know if anyone else got this one.

SAFETY RECALL G03 – BLOWER MOTOR
Dear: (Name)
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle
Safety Act.
DaimlerChrysler Corporation has decided that a defect, which relates to motor vehicle safety, exists in some
2006 and 2007 model year Jeep® Liberty vehicles.
The problem is... The blower motor on your vehicle (VIN: xxxxxxxxxxxxxxxxx) may overheat and
cause an interior fire under certain operating conditions.
What your dealer
will do...
DaimlerChrysler will repair your vehicle free of charge (parts and labor). To do
this, your dealer will replace the blower motor assembly. The work will take about ½
hour to complete. However, additional time may be necessary depending on service
schedules.
What you must
do to ensure your
safety...
Simply contact your dealer right away to schedule a service appointment. Ask the
dealer to hold the part for your vehicle or to order it before your appointment.
Remember to bring this letter with you to your dealer.
If you need help... If you have questions or concerns which your dealer is unable to resolve, please contact
DaimlerChrysler at 1-800-853-1403.
Please help us update our records, by filling out the attached prepaid postcard, if any of the conditions listed
on the card apply to you or your vehicle.
If you have already experienced this condition and have paid to have it repaired, you may send your original
receipts and/or other adequate proof of payment to the following address for reimbursement: DaimlerChrysler
P.O. Box 4639 Oak Ridge, TN 37831, Attention: Reimbursement.
If your dealer fails or is unable to remedy this defect without charge and within a reasonable time, you may
submit a written complaint to the Administrator, National Highway Traffic Safety Administration, 400
Seventh Street, S.W., Washington, DC 20590, or call the toll-free Vehicle Safety Hotline at 1-888-327-4236
(TTY 1-800-424-9153), or go to http://www.safercar.gov.
We're sorry for any inconvenience, but we are sincerely concerned about your safety. Thank you for your
attention to this important matter.
Customer Services Field Operations
DaimlerChrysler Corporation
Notification Code G03
Note to lessors receiving this recall: Federal regulation requires that you forward this recall notice to the lessee within 10 days.

Sorry if this is a repeat
Author:  bdptp73 [ Tue May 29, 2007 3:00 pm ]
Post subject: 
My CRD is listed on the website, but I have not received my notice in the mail yet.
My fathers gasser is listed on the site also.
Author:  Me&MyCRD [ Tue May 29, 2007 3:16 pm ]
Post subject: 
I scheduled my CRD for service tomorrow.

Just on a whim I checked the website and that is how I found that one.

Eric
Author:  Jeger [ Tue May 29, 2007 3:25 pm ]
Post subject: 
DANGIT!!! :evil: I'm on the list too :x :x :evil:

I thought I had made my last trip to that place. I guess I've gotta plug things back in one more time :roll:
Author:  Danno [ Tue May 29, 2007 4:04 pm ]
Post subject: 
Jeger wrote:
DANGIT!!! :evil: I'm on the list too :x :x :evil:

I thought I had made my last trip to that place. I guess I've gotta plug things back in one more time :roll:


LOL... I feel your pain.
I also laugh at the 1/2 hour. More like 1 day minimum.
Author:  Ranger1 [ Tue May 29, 2007 4:51 pm ]
Post subject: 
Careful - they may violate your CRD in your power reduction port, aka obd. Be sure your OBD chasity belt is securely fastened if your CRD has not yet been castrated( 05 models only, 06's come neutered). These Jeep dealers be crafty people, they will cut your torque off before you can turn your head and cough.
Author:  Me&MyCRD [ Tue May 29, 2007 5:16 pm ]
Post subject: 
Ranger1 wrote:
Careful - they may violate your CRD in your power reduction port, aka obd. Be sure your OBD chasity belt is securely fastened if your CRD has not yet been castrated( 05 models only, 06's come neutered). These Jeep dealers be crafty people, they will cut your torque off before you can turn your head and cough.


TSB states 2006-07 mods only. Should not apply to anything prior......but ya never can tell
Author:  AndySRT [ Tue May 29, 2007 5:38 pm ]
Post subject: 
yaa time for a appointment with the deal right in the middle of my busy season for work when i need the liberty the most.
Author:  GilaMonster [ Tue May 29, 2007 6:53 pm ]
Post subject: 
Ranger1 wrote:
Careful - they may violate your CRD in your power reduction port, aka obd. Be sure your OBD chasity belt is securely fastened if your CRD has not yet been castrated( 05 models only, 06's come neutered). These Jeep dealers be crafty people, they will cut your torque off before you can turn your head and cough.


Yeah, that happened to me and they called it the F31 service that was just suppose to let scanners read the OBDII codes. Those sensored word, they killed my torque!
Author:  Spowers [ Wed May 30, 2007 7:49 am ]
Post subject: 
My blower motor fan exploded - busting a hole in the air box, this was 2 summers ago. I should be ok.

Also, is there a way to cover the ODB port with a padlock type of entity?
Author:  Zonie [ Thu May 31, 2007 3:10 am ]
Post subject: 
My VIN is is showing a blower motor recall. I have a Provent and an '02 airbox. Do I have to remove those before I take it in?
Author:  boxhead [ Fri Jun 01, 2007 11:27 am ]
Post subject: 
I have a ProVent, and Edge chip and a Amsoil air filter. I think this time, I'm taking it is with EVERYTHING on it just to see what they say! :-)
Author:  jeep06 [ Sat Jun 02, 2007 11:20 am ]
Post subject:  recall
I took my '06 in Thursday to have the fuel filter head assembly changed out and they already ordered the new blower motor. Sometimes I wonder if it would be worth more as charcoal? :):)
Author:  kjfishman [ Sun Jun 03, 2007 10:32 am ]
Post subject: 
Zonie wrote:
My VIN is is showing a blower motor recall. I have a Provent and an '02 airbox. Do I have to remove those before I take it in?


I doubt they would even notice let alone care.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/