| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Rear Springs http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=22501 |
Page 1 of 1 |
| Author: | skywarn [ Fri Jul 13, 2007 5:32 pm ] |
| Post subject: | Rear Springs |
Does anyone know the specs? ie: hight, load rating etc? And are the rear springs the same as a gasser? just the front springs are diff due to the weight? I do not have the tow package. My build sheet just states: ZCVP Spring - LRear ZRVP Spring - RReaf Payload Rating 1350# ANY info will help. (yes its a lift question  )
|
|
| Author: | skywarn [ Mon Jul 16, 2007 10:04 am ] |
| Post subject: | |
Help...... |
|
| Author: | boilermaker2 [ Fri Jul 20, 2007 10:17 am ] |
| Post subject: | I haven't the nerve yet, but here is an idea |
What do you think? Its a safe site, managed by Firestone: http://www.fsip.com/pdfs/RR/installatio ... in4146.pdf |
|
| Author: | JDaPP [ Sat Jul 21, 2007 2:31 am ] |
| Post subject: | |
I have the air lift version and it works great. http://www.autoanything.com/suspension- ... 6A0A0.aspx |
|
| Author: | spoonplugger1 [ Sat Jul 21, 2007 12:32 pm ] |
| Post subject: | |
Weren't the lifted rigs using a bag out of a Toyota for the extra length needed? |
|
| Author: | Pablo [ Sat Jul 21, 2007 11:13 pm ] |
| Post subject: | |
The rear springs with my CRD Frakenlift were just plain old OME Heavy Duty. The rears are not CRD specific-- just the fronts. |
|
| Author: | JDaPP [ Sat Jul 21, 2007 11:43 pm ] |
| Post subject: | |
My bags were for a Toyota sequioa. The lady at air ride recommended that size after I gave her the dimensions of the springs. The rears I have are OME HD, and you should just be able to email the company, or All Js may be able to answer the load ratings questions for the springs |
|
| Author: | HIKJ [ Sun Jul 22, 2007 12:13 pm ] |
| Post subject: | |
All I can tell you the original rear springs on my CRD have a free height of 270 mm, outer diameter of approx. 18,5 cm and a coil wire diameter of 16,5 mm. |
|
| Author: | skywarn [ Mon Jul 23, 2007 4:12 pm ] |
| Post subject: | Re: I haven't the nerve yet, but here is an idea |
boilermaker2 wrote: What do you think? Its a safe site, managed by Firestone: http://www.fsip.com/pdfs/RR/installatio ... in4146.pdf Thanks! In fact this is what my 4 Wheel Parts store is going to order for me. $89 shipped. Pablo wrote: The rear springs with my CRD Frakenlift were just plain old OME Heavy Duty. The rears are not CRD specific-- just the fronts.
This was this info i was really looking for. and so i fig i would just take my chances... I went ahead and installed a 3" Rough Country Lift. WOW!!! it rocks!!!! ( i will be doing a write up with full pics in a few days  ) and after it was all said and done it worked out to a true 3" lift.
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|