This is too cool...I cant believe I didnt think of this myself
http://www.oilchangesystems.com/oil_ext ... sembly.php
I gotta get/make me one of these setups.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Banjo bolt for a oil pan plug?! http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=25336 |
Page 1 of 1 |
| Author: | Jeger [ Fri Oct 12, 2007 9:45 am ] |
| Post subject: | Banjo bolt for a oil pan plug?! |
This is too cool...I cant believe I didnt think of this myself http://www.oilchangesystems.com/oil_ext ... sembly.php
I gotta get/make me one of these setups. |
|
| Author: | panda-52 [ Fri Oct 12, 2007 10:25 am ] |
| Post subject: | |
This also could be a slick way to plumb the return from a bypass oil filter without having to modify the oil pan or valve cover. |
|
| Author: | UFO [ Fri Oct 12, 2007 10:57 am ] |
| Post subject: | |
Very cool idea! I'm sure you could find the right fittings to mate to the pan. |
|
| Author: | Jeger [ Fri Oct 12, 2007 11:54 am ] |
| Post subject: | |
panda-52 wrote: This also could be a slick way to plumb the return from a bypass oil filter without having to modify the oil pan or valve cover.
And yes folks the fitting are out there. http://store.norgren.com/INT/en/cat3/pr ... 8&catid=3& |
|
| Author: | dgeist [ Fri Oct 12, 2007 1:53 pm ] |
| Post subject: | Re: Banjo bolt for a oil pan plug?! |
Jeger wrote: This is too cool...I cant believe I didnt think of this myself
http://www.oilchangesystems.com/oil_ext ... sembly.php I gotta get/make me one of these setups. Neat idea, but unless you change your oil a LOT, it doesn't really offer that much of a benefit over a system like the fumoto. There are also more parts to fail/leak/break. |
|
| Author: | scrambledKJ [ Fri Oct 12, 2007 2:02 pm ] |
| Post subject: | banjo |
Mercedes used banjo fittings on the tranny in some of the old diesels. Banjo fittins to connect cooler lines and some dipsicks are banjo fittings also. Travis |
|
| Author: | UFO [ Fri Oct 12, 2007 3:10 pm ] |
| Post subject: | |
panda-52 wrote: This also could be a slick way to plumb the return from a bypass oil filter without having to modify the oil pan or valve cover. Besides the minor clearance issue of the Fumoto, I'm thinking this is the main potential benefit of this modification.
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|