LOST JEEPS :: View topic - Black Engine Cover?

I can't hear a difference with it on or off. As far as I'm concerned everyone should just chuck the thing. I want to see my engine, not some dinky plastic cover that tells me I have a CRD.

My son hung his on the wall in his computer room - some people have that wierd stuff from picasso or van gough on their walls, and can still look you in the eye like it's normal.............

My friend in Wyoming would probably call that decorating style "late 20th century greenback". :lol:

He tends to get a little peeved at the attitudes of some of the transplanted Denverites that have moved into his area of Wyoming to cash in on the natural gas boom that's going on (Rock Springs).

I can somewhat understand how he feels. I've lost count of the number of times that, here in my area of NC, I've gotten behind a transplant that's still running with expired NY/PA/OH/etc plates because they're too bloody cheap to pay for registering their car in NC and avoid paying state and county property tax on them. :evil:

Anyway, they're needed to prevent the cover from falling off the nails in the wall.................

I went to route my block heater cord yesterday and removed the black engine cover that is on top of the engine. Besides keeping in heat, does anyone know if this does any good? I removed it being an old school diesel guy. I'm not real sure why they put it there from the factory? Maybe just for looks?

Thanks

Pete

Author:	cxturboboost [ Sun Jan 20, 2008 11:46 am ]
Post subject:	Black Engine Cover?
I went to route my block heater cord yesterday and removed the black engine cover that is on top of the engine. Besides keeping in heat, does anyone know if this does any good? I removed it being an old school diesel guy. I'm not real sure why they put it there from the factory? Maybe just for looks? Thanks Pete

Author:	techTim [ Sun Jan 20, 2008 11:51 am ]
Post subject:
some noise attenuation, old school diesel guys like the sound of the engine though and just leave the thing off.

Author:	cxturboboost [ Sun Jan 20, 2008 11:55 am ]
Post subject:	Engine Cover
Tim, That was my same thinking!!! Can I ask which magnaflow muffler you used? I've got to get this boat anchor factory exhaust brake off of this thing... Pete

Author:	Sir Sam [ Sun Jan 20, 2008 3:08 pm ]
Post subject:
I can't hear a difference with it on or off. As far as I'm concerned everyone should just chuck the thing. I want to see my engine, not some dinky plastic cover that tells me I have a CRD.

Author:	durangotang [ Sun Jan 20, 2008 5:42 pm ]
Post subject:
Mine comes off in the summer... but in the winter I want to keep as much heat as I can in there... may be negligable... but oh well

LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/

Black Engine Cover? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=28724	Page 1 of 2

Author:	BlackLibertyCRD [ Sun Jan 20, 2008 7:12 pm ]
Post subject:
Sir Sam wrote: I can't hear a difference with it on or off. As far as I'm concerned everyone should just chuck the thing. I want to see my engine, not some dinky plastic cover that tells me I have a CRD. Hey, didn't you know that we all paid extra for that cover?

Author:	gmctd [ Sun Jan 20, 2008 10:06 pm ]
Post subject:
My son hung his on the wall in his computer room - some people have that wierd stuff from picasso or van gough on their walls, and can still look you in the eye like it's normal.............

Author:	Sir Sam [ Sun Jan 20, 2008 11:00 pm ]
Post subject:
gmctd wrote: My son hung his on the wall in his computer room - some people have that wierd stuff from picasso or van gough on their walls, and can still look you in the eye like it's normal............. Ha no kidding. (what is normal anyway) I decorate my walls with various car related icons.

Author:	retmil46 [ Mon Jan 21, 2008 3:20 am ]
Post subject:
My friend in Wyoming would probably call that decorating style "late 20th century greenback". He tends to get a little peeved at the attitudes of some of the transplanted Denverites that have moved into his area of Wyoming to cash in on the natural gas boom that's going on (Rock Springs). I can somewhat understand how he feels. I've lost count of the number of times that, here in my area of NC, I've gotten behind a transplant that's still running with expired NY/PA/OH/etc plates because they're too bloody cheap to pay for registering their car in NC and avoid paying state and county property tax on them.

Author:	Sir Sam [ Mon Jan 21, 2008 3:35 am ]
Post subject:
retmil46 wrote: My friend in Wyoming would probably call that decorating style "late 20th century greenback". He tends to get a little peeved at the attitudes of some of the transplanted Denverites that have moved into his area of Wyoming to cash in on the natural gas boom that's going on (Rock Springs). I can somewhat understand how he feels. I've lost count of the number of times that, here in my area of NC, I've gotten behind a transplant that's still running with expired NY/PA/OH/etc plates because they're too bloody cheap to pay for registering their car in NC and avoid paying state and county property tax on them. HA, to take the topic further off topic........ Ya there is alot of natural gas exploration going on around here, its wierd even 5 years ago it was just dead like that. Lots of it along the western slope, woman I know ended up getting a small stake in some mineral rights from her families property, she managed the estate for the family and managed to hold onto the mineral rights herself. Now she is getting something like a $8,000 check from the natural gas they let out outta the ground there. My father used to be an oil man back in texas in the '80s, before the bottom fell outta it, geologist by trade moved into the federal government doing environmental cleanup stuff. Been good for him ever since.

Author:	ATXKJ [ Mon Jan 21, 2008 11:33 am ]
Post subject:
For wall art - check out tjkj's - jeep grill and assorted SFA parts laying around in the SFA section. back to the original question - I remember someone having warranty issues and the dealer maintained that he had to have the cover on there (it was one of the dealers that wasn't real sure what a diesel was). - caused him to drive home and get it - so that he could get his Jeep out and take it to a real mechanic. It's only real purpose is sound insulation

Author:	truckbouy2 [ Mon Jan 21, 2008 12:12 pm ]
Post subject:
Gee.....Take the trash out once in a while

Author:	UFO [ Mon Jan 21, 2008 12:22 pm ]
Post subject:
I like the look of the cover better than the engine itself, with that harness and the cover mount pimples all over the valve cover. Some engines are meant to be shown off, and I don't think the VM unit is.

Author:	DI3S3LKJ [ Tue Jan 22, 2008 11:53 pm ]
Post subject:
Don't lose the rubber gizmoes ,can't buy them without the cover $70 plus

Author:	Zonie [ Wed Jan 23, 2008 2:20 am ]
Post subject:
THAT'S good to know! Who'd have thunk it!?

Author:	cxturboboost [ Wed Jan 23, 2008 8:01 pm ]
Post subject:	Plug into?
I don't understand your question about where does it plug into?

Page 1 of 2	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/

Author:	gmctd [ Wed Jan 23, 2008 10:42 am ]
Post subject:
Anyway, they're needed to prevent the cover from falling off the nails in the wall.................

Author:	Sir Sam [ Wed Jan 23, 2008 2:56 pm ]
Post subject:
gmctd wrote: Anyway, they're needed to prevent the cover from falling off the nails in the wall................. Not if you nail it to the wall.

Author:	gmctd [ Wed Jan 23, 2008 4:16 pm ]
Post subject:
Don't see the studs supporting the cover on the engine, don't wanna see the nails supporting the cover on the wall....................

Author:	skywarn [ Wed Jan 23, 2008 5:29 pm ]
Post subject:	Re: Black Engine Cover?
cxturboboost wrote: I went to route my block heater cord yesterday and removed the black engine cover that is on top of the engine. Besides keeping in heat, does anyone know if this does any good? I removed it being an old school diesel guy. I'm not real sure why they put it there from the factory? Maybe just for looks? Thanks Pete Where does it plug into?????