LOST JEEPS :: View topic

Key on to run position, immediately hold down the trip reset button, the hours should show up on the odometer.

Has anyone tried it on a 06? All it did for me was zero the trip odo unless I held it too long or some other dumb thing :roll:

Joe Romas wrote:

Has anyone tried it on a 06? All it did for me was zero the trip odo unless I held it too long or some other dumb thing :roll:

Ditto. In fact, when this came up before, I don't recall anyone actually getting it to work. I wish it would, cause it would be interesting.

How can I find out my total hours to date on my over-head data gizmo?

I know how to reset between oil changes and fill-ups but where is the total hrs. button?

Thanks

Tom

The dashboard trick didn't do it for me either, just an advanced gauge test.

Inferno... Did your KJ come factory with the EVIC? I'd love to know what your vin coding is, or be able to copy your BCM's info onto mine. I have an 05 Limited too, but it seems like the only "limited" feature it came with was a power driver's seat.

No leather, no sunroof, no evic... It sucks not having that stuff, but not being able to turn on the computer options is really stupid. On my Jetta, I could recode everything if I needed to.

C'mon...been a few years here and we have been asking the same question...how do you do it? Yes I have the limited so maybe I can access it different than than a sport owner but give us some info and some guidelines please....I want to know! I have 39K so I assume about 1000 hours but I want to be sure.....please help.

for a reference point i have 36444 miles and my total hour meter says 40:51:XX (hours:min:sec) so i doubt you have 1000 hours on your jeep.

05infernoCRDL wrote:

for a reference point i have 36444 miles and my total hour meter says 40:51:XX (hours:min:sec) so i doubt you have 1000 hours on your jeep.

Ah yes, 36000/40 is 900 miles per hour as an average speed.

Author:	tomasnc [ Mon Mar 17, 2008 8:27 pm ]
Post subject:	Hour meter
How can I find out my total hours to date on my over-head data gizmo? I know how to reset between oil changes and fill-ups but where is the total hrs. button? Thanks Tom

Author:	Uffe [ Tue Mar 18, 2008 3:57 am ]
Post subject:
Total hours? I'm not sure that exist on the EVICs. I'll listen in, maybe there is a special mode you can access to see the total hours, as there is a mode to access the compass angle. That would be fun, mine is from an 00 Grand Cherokee, so it has had it's share of hours in that. If you want to find out what your total hours approximately is, take your odometer reading and devide that by 38. 38 MPH corresponds to some "standard" mean speed over a long period of time which manufactureres design their vehicles by. IIRC vehicle manufactureres design their vehicles to be run for 5,000hrs or approx. 188,000 miles.

Author:	MrMopar64 [ Tue Mar 18, 2008 7:21 am ]
Post subject:
Key on to run position, immediately hold down the trip reset button, the hours should show up on the odometer.

Author:	dgeist [ Tue Mar 18, 2008 9:53 am ]
Post subject:
MrMopar64 wrote: Key on to run position, immediately hold down the trip reset button, the hours should show up on the odometer. that's sooo cool! Have you assembled a list of all these undocumented features? I'm in the Network Engineering field and everyone's routers have undocumented commands that give you the really good info. I can google those. Not so much on Mopar....

Author:	Joe Romas [ Tue Mar 18, 2008 10:00 am ]
Post subject:
Has anyone tried it on a 06? All it did for me was zero the trip odo unless I held it too long or some other dumb thing

LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/

Hour meter http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=30652	Page 1 of 2

Author:	Goglio704 [ Tue Mar 18, 2008 11:00 am ]
Post subject:
Joe Romas wrote: Has anyone tried it on a 06? All it did for me was zero the trip odo unless I held it too long or some other dumb thing Ditto. In fact, when this came up before, I don't recall anyone actually getting it to work. I wish it would, cause it would be interesting.

Author:	MrMopar64 [ Tue Mar 18, 2008 12:02 pm ]
Post subject:
As far as I know it should work with any Chrysler vehicle. It works for sure on my '04 Cummins and my dad's '07 Cummins, and I've tried it before on development x-port vehicles. It seemed on my dad's newer truck you keyed on to run, instantly pressed the trip button, let up 5 or 6 sec later and it popped up on the odometer. I'll ask around and see if for some reason it didn't work on KJ...

Author:	Joe Romas [ Tue Mar 18, 2008 12:06 pm ]
Post subject:
Goglio704 wrote: Joe Romas wrote: Has anyone tried it on a 06? All it did for me was zero the trip odo unless I held it too long or some other dumb thing Ditto. In fact, when this came up before, I don't recall anyone actually getting it to work. I wish it would, cause it would be interesting. As I recall one of the flashes disabled reading codes that way on the 06 models. There seems to be some suttle and some not so suttle differences between 05 and 06 computers

Author:	007husky [ Wed Mar 19, 2008 11:37 pm ]
Post subject:
All it did on mine is run a test on the dash, odo counted from 1 to 9 as the needles moved arround and lights blinked.

Author:	05infernoCRDL [ Wed Mar 19, 2008 11:40 pm ]
Post subject:	Re: Hour meter
tomasnc wrote: How can I find out my total hours to date on my over-head data gizmo? I know how to reset between oil changes and fill-ups but where is the total hrs. button? Thanks Tom i just scroll through my options and it pops up

Author:	geordi [ Thu Mar 20, 2008 12:28 am ]
Post subject:
The dashboard trick didn't do it for me either, just an advanced gauge test. Inferno... Did your KJ come factory with the EVIC? I'd love to know what your vin coding is, or be able to copy your BCM's info onto mine. I have an 05 Limited too, but it seems like the only "limited" feature it came with was a power driver's seat. No leather, no sunroof, no evic... It sucks not having that stuff, but not being able to turn on the computer options is really stupid. On my Jetta, I could recode everything if I needed to.

Author:	05infernoCRDL [ Thu Mar 20, 2008 1:08 am ]
Post subject:
geordi wrote: The dashboard trick didn't do it for me either, just an advanced gauge test. Inferno... Did your KJ come factory with the EVIC? I'd love to know what your vin coding is, or be able to copy your BCM's info onto mine. I have an 05 Limited too, but it seems like the only "limited" feature it came with was a power driver's seat. No leather, no sunroof, no evic... It sucks not having that stuff, but not being able to turn on the computer options is really stupid. On my Jetta, I could recode everything if I needed to. it is factory, and i have all the options... leather, EVIC, "6" way power seats ( really 4 way power, 2 way manual), sunroof, heated seats, premium system....i think everything except for the nav system... If you can tell me where to look i will give you the numbers on the BCM so there is some comparison. and if we can finc a way to get my info off and flash yours that is cool too. My Little Bro, who is somewhere on this forum, has a limited but can't get the Tire PSI, and some other random EVIC things that i can.

Author:	geordi [ Thu Mar 20, 2008 1:17 am ]
Post subject:
Thanks for that, I'll have to let you know. I've heard that the dealer can recode the BCM for various things, but it's all according to Mopar's build data which is tied to vin numbers. I'm pretty friendly with my local (at home) dealership, I might stop there tomorrow and see about this. The guys in Savannah where I'm in grad school are more of the confused-by-new-ideas crowd. Maybe its as simple as turning options on with the DRBIII, maybe it is forcing a new vin profile onto it, and telling it to clone that info onto (other than the vin obviously) onto the BCM. I wish I could do it with the AE device... but no such luck thus far. Maybe with the next version.

Author:	biggiefl [ Fri Mar 21, 2008 12:44 am ]
Post subject:
C'mon...been a few years here and we have been asking the same question...how do you do it? Yes I have the limited so maybe I can access it different than than a sport owner but give us some info and some guidelines please....I want to know! I have 39K so I assume about 1000 hours but I want to be sure.....please help.

Page 1 of 2	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/

Author:	tomasnc [ Fri Mar 21, 2008 1:34 pm ]
Post subject:
I am getting the same read out as 007Husky..... 11111-99999 and a gage check-out. I must be holding my mouth wrong?

Author:	Uffe [ Fri Mar 21, 2008 6:35 pm ]
Post subject:
The guys who get the dash gauge test are holding the reset button before they turn their ignition to ON. As I read MrMopar64s post you must hold it 5 seconds AFTER you turn the key to ON. Did anyone try with the key on ACC and hitting the reset button? Maybe the ON position on a gasser equals the "ACC" position on a diesel? Perhaps a daft idea, but it's for free

Author:	05infernoCRDL [ Mon Mar 24, 2008 3:37 pm ]
Post subject:
biggiefl wrote: C'mon...been a few years here and we have been asking the same question...how do you do it? Yes I have the limited so maybe I can access it different than than a sport owner but give us some info and some guidelines please....I want to know! I have 39K so I assume about 1000 hours but I want to be sure.....please help. for a reference point i have 36444 miles and my total hour meter says 40:51:XX (hours:min:sec) so i doubt you have 1000 hours on your jeep.

Author:	Uffe [ Mon Mar 24, 2008 3:52 pm ]
Post subject:
05infernoCRDL wrote: for a reference point i have 36444 miles and my total hour meter says 40:51:XX (hours:min:sec) so i doubt you have 1000 hours on your jeep. Ah yes, 36000/40 is 900 miles per hour as an average speed.

Author:	05infernoCRDL [ Mon Mar 24, 2008 4:12 pm ]
Post subject:
Uffe wrote: 05infernoCRDL wrote: for a reference point i have 36444 miles and my total hour meter says 40:51:XX (hours:min:sec) so i doubt you have 1000 hours on your jeep. Ah yes, 36000/40 is 900 miles per hour as an average speed. hmmmmm..... there is no way i have 40 hours in it since i disconnected the battery... wonder where the meter rools over... it is ticking for an hrs:min:secs set up.

Author:	dieseldawg [ Mon Mar 24, 2008 6:36 pm ]
Post subject:
I installed a Hobbs digital hour meter under the dash since Jeep was new. With 32,300 miles, I have 1210.7 hrs. Hour meter only runs when ignition is in the run position, not the acc position.