| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| VM Motori info http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=32333 |
Page 1 of 1 |
| Author: | DieselDavy [ Fri May 09, 2008 12:19 am ] |
| Post subject: | VM Motori info |
He guys, Is there anywhere on this site or elsewhere that has good info on the specs of the 2.8L? Maybe showing cutaways, explaining features, etc. I've looked around quite a bit here and at VM's website. Thanks, Dave |
|
| Author: | Pablo [ Fri May 09, 2008 2:12 am ] |
| Post subject: | |
The factory manual may be your best bet. |
|
| Author: | DieselDavy [ Fri May 09, 2008 8:27 am ] |
| Post subject: | spoiled |
I guess I'm spoiled by all that's available about our GM 6.2/6.5 & Duramax engines! Coming up on 30 years of production gives us plenty of time to come up with good material... I'm just trying to find what ever is out there on this little beauty! Dave |
|
| Author: | blake1827 [ Sat May 10, 2008 7:22 pm ] |
| Post subject: | |
you could always e-mail them: nfrabetti@vmmotori.com, I didn't have a problem getting a reply to my question: Cast iron for cylinder block Aluminium for cylinder head Regards. Nicola Frabetti -----Messaggio originale----- Da: blake1827@yahoo.com Inviato: venerdì 24 novembre 2006 2.28 A: Frabetti Nicola Oggetto: 2.8L Jeep CRD I just had a quick question, what metal is used to make the motor? Thanks! Jonathon |
|
| Author: | Sir Sam [ Sat May 10, 2008 8:38 pm ] |
| Post subject: | Re: VM Motori info |
DieselDavy wrote: He guys, Is there anywhere on this site or elsewhere that has good info on the specs of the 2.8L? Maybe showing cutaways, explaining features, etc.
I've looked around quite a bit here and at VM's website. Thanks, Dave http://lostjeeps.com/forum/phpBB3/viewtopic.php?t=31254 |
|
| Author: | DarbyWalters [ Sat May 10, 2008 9:17 pm ] |
| Post subject: | |
http://www.vmmotori.it/uploads/doc/1162.pdf Best i could find |
|
| Author: | DieselDavy [ Sun May 11, 2008 8:40 pm ] |
| Post subject: | |
Thanks a bunch guys! That is a lot of good stuff. As I said before, with the GM hardware, we've had 28 model years to research. If you go to 'TheDieselPage.com' you'll find articles on almost all aspects of the designs. The CRDs have only been w/Jeep for around 4 years. This site is great and I'm sure as time goes one, we'll build a great data base of CRD related info. You've got a good start already! Thanks again, Dave |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|