I would like to know if they fit without modifying anything. I think they are from a "97" grade char. But I can not be sure. Comments and concerns please.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Will these Wheels fit my "06" CRD? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=36618 |
Page 1 of 1 |
| Author: | JeepCRD4Me [ Thu Oct 09, 2008 8:44 am ] |
| Post subject: | Will these Wheels fit my "06" CRD? |
|
I would like to know if they fit without modifying anything. I think they are from a "97" grade char. But I can not be sure. Comments and concerns please.
|
|
| Author: | bugnout [ Thu Oct 09, 2008 9:24 am ] |
| Post subject: | |
I doubt it, I think those are 15" rims. The bolt pattern should be correct, but the only way to tell is to try them to see if they clear the disk brake. |
|
| Author: | Joe Romas [ Thu Oct 09, 2008 9:28 am ] |
| Post subject: | |
I don't know if they will fit or not  But while doing a google search I think they are a 9015 and not the 9027 that they are marked as  First I searched on "jeep wheel 9027 then one on jeep wheel 9015 and the latter appears to be this wheel.
Info on 9015 wheels. http://cgi.ebay.com/ebaymotors/1996-199 ... efidZstore Info on 9027 wheels. http://cgi.ebay.com/ebaymotors/1999-200 ... efidZstore This looks like our wheel. http://cgi.ebay.com/ebaymotors/2002-200 ... 0237041094 |
|
| Author: | JeepCRD4Me [ Thu Oct 09, 2008 10:01 am ] |
| Post subject: | |
I know the rim is 16" it has a 16" tire on it. As well i have seen them on libbies but I dont know if it was a CRD.....if that makes a diffrence. |
|
| Author: | JeepCRD4Me [ Thu Oct 09, 2008 10:30 am ] |
| Post subject: | |
From a member in the wheel and tire section... http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=36619 |
|
| Author: | Sir Sam [ Thu Oct 09, 2008 2:13 pm ] |
| Post subject: | |
Those are 16" wheels from the 96-98 Grand Cherokee (ZJ) They will fit on any KJ. |
|
| Author: | jinstall [ Thu Oct 09, 2008 4:08 pm ] |
| Post subject: | |
I am interested in the size, offset and weight of each wheel. |
|
| Author: | JeepCRD4Me [ Mon Oct 20, 2008 2:57 pm ] |
| Post subject: | |
I took the wheel of this fella for $135.00 I can not make up my mind if i should paint the background or not? here is the size info some of you are asking for. 
|
|
| Author: | jinstall [ Mon Oct 20, 2008 5:27 pm ] |
| Post subject: | |
is that 25.4 lbs? |
|
| Author: | tulsa [ Mon Oct 20, 2008 5:59 pm ] |
| Post subject: | |
jinstall wrote: is that 25.4 lbs?
I am thinking it means a 1" or 25.4mm offset. I think the standard offset on the CRD is @44mm. Lewis |
|
| Author: | JeepCRD4Me [ Mon Nov 03, 2008 11:53 am ] |
| Post subject: | |
tulsa wrote: jinstall wrote: is that 25.4 lbs? I am thinking it means a 1" or 25.4mm offset. I think the standard offset on the CRD is @44mm. Lewis I dont know that is just what is on the back of the wheels. I though you guys would know the numbers??? |
|
| Author: | tulsa [ Mon Nov 03, 2008 2:10 pm ] |
| Post subject: | |
JeepCRD4Me wrote: tulsa wrote: jinstall wrote: is that 25.4 lbs? I am thinking it means a 1" or 25.4mm offset. I think the standard offset on the CRD is @44mm. Lewis I dont know that is just what is on the back of the wheels. I though you guys would know the numbers??? I think it will work as is. The worst you would have to do is use a 1/2" spacer to correct the offset. |
|
| Author: | Sir Sam [ Mon Nov 03, 2008 5:19 pm ] |
| Post subject: | |
tulsa wrote: JeepCRD4Me wrote: tulsa wrote: jinstall wrote: is that 25.4 lbs? I am thinking it means a 1" or 25.4mm offset. I think the standard offset on the CRD is @44mm. Lewis I dont know that is just what is on the back of the wheels. I though you guys would know the numbers??? I think it will work as is. The worst you would have to do is use a 1/2" spacer to correct the offset. those wheel should have the same offset as KJ/XJ wheels. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|