| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| CV question http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=38397 |
Page 1 of 1 |
| Author: | Diggerfreek [ Fri Dec 19, 2008 11:49 pm ] |
| Post subject: | CV question |
Hey there guys, my buddy has a 05 auto and his cv's are going out. Do you have any recommendations for replacement? |
|
| Author: | ATXKJ [ Sat Dec 20, 2008 10:32 am ] |
| Post subject: | |
I'd try NAPA - note tj's comments http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?p=402090#402090 and as with anything CRD - expect it to be special order |
|
| Author: | Diggerfreek [ Sat Dec 20, 2008 11:31 am ] |
| Post subject: | |
Thanks for the reply. I tried finding the number from napa's web site but all I could come up with was the front drive shaft for 400 bucks |
|
| Author: | aandlwoods [ Wed Dec 24, 2008 5:41 pm ] |
| Post subject: | |
jeepinbyal.com has some cv shafts on his site... they are expensive though |
|
| Author: | CRDMiller [ Thu Dec 25, 2008 11:14 am ] |
| Post subject: | |
http://www.rocky-road.com/kjdrive.html 235 bucks left or right original mopar. unsure if appropriate for the crd but it has 4 cyl and 6 cyl, ask em, they have some crd stuff. I don't know if that price is good or not but if it it is, enjoy. |
|
| Author: | Diggerfreek [ Thu Dec 25, 2008 1:51 pm ] |
| Post subject: | |
Thanks for your help guys. From what i have found, the main dealer i use here in Colorado will sell them to me for 190 and 230 each, but i don't remember what side was which, and at auto zone, i can rebuilt ones for 120 and 105. I will keep you posted as to whether the auto zone ones are correct replacements |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|