Well the rear of my crd Frankenlift is settling. The lift is one of the earliest with the 500 pound springs and the spacer that was later eliminated due to cv clearance issues. The front never settled much, despite pounding on it frequently. The rear, however, is getting kinda low in the back (with about 100 pounds of tools back there).

I have been toying with the idea of getting the Jeepin by al 4 inch lift goodies for the rear end and leaving the front with the Frankenlift stuff as is. Has anyone else thought of this? The front is just so high that I think it would work, I would rather have a higher rear end than the higher front end.