LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

holy cow! $1400
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=42457		 Page 1 of 2
Author:  Sir Sam [ Mon Apr 20, 2009 6:17 pm ]
Post subject:  holy cow! $1400
http://ww4.klode.com/kws/napplications/ ... Exit=Close

wow.........just wow, not like I had the money.
Author:  grommet1 [ Mon Apr 20, 2009 7:49 pm ]
Post subject: 
I want one!
You gonna fix it or use it for parts?
Author:  Sir Sam [ Mon Apr 20, 2009 7:53 pm ]
Post subject: 
i didn't buy it. i spent all my money on the last one.

this just went really cheap. real cheap.......this is what happens when I dont bid.
Author:  UFO [ Mon Apr 20, 2009 7:53 pm ]
Post subject: 
wow indeed. someone got a killer deal.
Author:  BlackLibertyCRD [ Mon Apr 20, 2009 11:17 pm ]
Post subject: 
Sir Sam wrote:
i didn't buy it. i spent all my money on the last one.

this just went really cheap. real cheap.......this is what happens when I dont bid.


If you did bid on this one it would of went for more unless you could of did last second bid like on e-bay. Maybe then the other guy would of paid more.
Author:  Sir Sam [ Mon Apr 20, 2009 11:44 pm ]
Post subject: 
BlackLibertyCRD wrote:
Sir Sam wrote:
i didn't buy it. i spent all my money on the last one.

this just went really cheap. real cheap.......this is what happens when I dont bid.


If you did bid on this one it would of went for more unless you could of did last second bid like on e-bay. Maybe then the other guy would of paid more.


yup, cannot measure anything without effecting it
Author:  CRD Joe [ Tue Apr 21, 2009 12:17 am ]
Post subject: 
Im going to have to give you a SURE BUDDY on that one........ :shock:
Author:  Sir Sam [ Tue Apr 21, 2009 12:26 am ]
Post subject: 
CRD Joe wrote:
Im going to have to give you a SURE BUDDY on that one........ :shock:


huh?
Author:  CRD Joe [ Tue Apr 21, 2009 12:46 am ]
Post subject: 
Sir Sam wrote:
CRD Joe wrote:
Im going to have to give you a SURE BUDDY on that one........ :shock:


huh?


To much work! A four cylinder gasser?

Ugh. :-)r
Author:  Sir Sam [ Tue Apr 21, 2009 12:58 am ]
Post subject: 
CRD Joe wrote:
Sir Sam wrote:
CRD Joe wrote:
Im going to have to give you a SURE BUDDY on that one........ :shock:


huh?


To much work! A four cylinder gasser?

Ugh. :-)r


Uh, its a CRD.
Author:  CRD Joe [ Tue Apr 21, 2009 8:40 am ]
Post subject: 
Sir Sam wrote:
CRD Joe wrote:
Sir Sam wrote:
CRD Joe wrote:
Im going to have to give you a SURE BUDDY on that one........ :shock:


huh?


To much work! A four cylinder gasser?

Ugh. :-)r


Uh, its a CRD.


OOPS! I saw 171 CI and didnt make the connection.. Hell of a deal.... :D
Author:  yakers [ Tue Apr 21, 2009 2:02 pm ]
Post subject: 
Sir Sam wrote:
BlackLibertyCRD wrote:
Sir Sam wrote:
i didn't buy it. i spent all my money on the last one.

this just went really cheap. real cheap.......this is what happens when I dont bid.


If you did bid on this one it would of went for more unless you could of did last second bid like on e-bay. Maybe then the other guy would of paid more.


yup, cannot measure anything without effecting it



Now that was the best example of the uncertainty principle I have ever read, have to remember that. Not living in scienceland since I retired last year but that would have worked well in lunch table discussions.
Author:  UFO [ Tue Apr 21, 2009 2:51 pm ]
Post subject: 
Yep, the Heisenberg uncertainty principle illustrated in the macro model. :wink:
Author:  Sir Sam [ Tue Apr 21, 2009 3:31 pm ]
Post subject: 
UFO wrote:
Yep, the Heisenberg uncertainty principle illustrated in the macro model. :wink:


This is why I never leave home without my heisenberg compensators.
Author:  ChesterCRD [ Tue Apr 21, 2009 8:24 pm ]
Post subject: 
Sir Sam wrote:
UFO wrote:
Yep, the Heisenberg uncertainty principle illustrated in the macro model. :wink:


This is why I never leave home without my heisenberg compensators.


I'm searching for a flux capacitor for my SEGR.
Author:  robotmind [ Tue Apr 21, 2009 10:28 pm ]
Post subject:  Good deal?
Rolled or flipped salvage vehicles make me leery... Think of the damage that could have been done to the engine/turbo from oil starvation. Practicing your own Due Diligence is a must in these cases.

Cheers,
Erik
Author:  Sir Sam [ Tue Apr 21, 2009 10:50 pm ]
Post subject:  Re: Good deal?
robotmind wrote:
Rolled or flipped salvage vehicles make me leery... Think of the damage that could have been done to the engine/turbo from oil starvation. Practicing your own Due Diligence is a must in these cases.

Cheers,
Erik


Both my other rolled CRDs are just fine thanks.
Author:  UFO [ Wed Apr 22, 2009 10:33 am ]
Post subject:  Re: Good deal?
robotmind wrote:
Rolled or flipped salvage vehicles make me leery... Think of the damage that could have been done to the engine/turbo from oil starvation. Practicing your own Due Diligence is a must in these cases.

Cheers,
Erik
Not much damage that I can think of. How long will the engine run once fuel pressure drops? About 10 seconds. And the turbo will not suffer at all with no load.
Author:  robotmind [ Fri Apr 24, 2009 12:44 pm ]
Post subject:  roll/flip
The CRD in the OP does not exactly appear to have been "lightly" rolled. i.e. While slowly navigating Off Road trails or such... Once the wheels lose contact with the road the engine will reach redline very quickly even under light throttle... It is possible for the accelerator pedal to become stuck or floored during a violent crash. Not likely that it would happen often though. Of course this is a consideration I would make if I was planning to purchase that vehicle.

Cheers,
Erik
Author:  vegiH [ Fri Apr 24, 2009 2:21 pm ]
Post subject:  Robotmind
Do you frequent Kitco?DYODD 8) .I would be leary of Turbo,cracked glowplugs(trust me I know),tranny and airbags if any.I would take that lil boat motor and make me a sandrail.......and wharehouse the pretty parts till they rot of yours and mine and are worth big$$$$..............
Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/