One '05 fuel tank wiring harness to power the Cummins lift pump--56050284AB. You pay shipping.
I ordered both the '06 and '05 by mistake.
btw . . . the new Cummins pump works great.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Free to good home http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=46415 |
Page 1 of 1 |
| Author: | AZ CRD [ Mon Sep 07, 2009 7:55 am ] |
| Post subject: | Free to good home |
One '05 fuel tank wiring harness to power the Cummins lift pump--56050284AB. You pay shipping. I ordered both the '06 and '05 by mistake.
btw . . . the new Cummins pump works great.
|
|
| Author: | PhoenixCRD [ Mon Sep 07, 2009 10:45 am ] |
| Post subject: | I'll take it! |
PM sent Gary |
|
| Author: | AZ CRD [ Mon Sep 07, 2009 2:01 pm ] |
| Post subject: | Re: I'll take it! |
PhoenixCRD wrote: PM sent It goes to the local guy!
Gary Thanks all who expressed interest. |
|
| Author: | Silverdiesel [ Mon Sep 07, 2009 9:49 pm ] |
| Post subject: | |
good for you Gary-- that ABS problem I had if you recall on my 06 required I replace hat exact same harness in my CRD but I got the diesel version and simply ran a cheater wire from that "hot" 12 volt, fuel pump for an enventual lift pump I will install soon-- ran said wire through the loom and have it taped up securely for now-- Roland |
|
| Author: | PhoenixCRD [ Tue Sep 08, 2009 3:19 pm ] |
| Post subject: | |
Silverdiesel wrote: good for you Gary--
that ABS problem I had if you recall on my 06 required I replace hat exact same harness in my CRD but I got the diesel version and simply ran a cheater wire from that "hot" 12 volt, fuel pump for an enventual lift pump I will install soon-- ran said wire through the loom and have it taped up securely for now-- Roland I'm sensing another Arizona garage day for installing lift pumps! Gary (the gasser guys can show up and watch) 
|
|
| Author: | Turbo Tim [ Tue Sep 08, 2009 3:44 pm ] |
| Post subject: | |
Quote: I'm sensing another Arizona garage day for installing lift pumps!
Yup, I'm in. I already have the lift pump, but I can enjoy a cold one and instruct the others on how to do it. I also have the AutoEnginuity Scanner program on my laptop so I can scan your CRD's for other Non-OBDII issues. Since I got laid-off 2 months ago, let me check my schedule......Yup, anytime is good. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|