I just pulled fuel heater relay and left unit plugged in? Relay was hot. Is there some reason no one else has posted this?

Your point bieng...........................................?

_________________
06 LIMITED 100000miles, MAGNAFLOW, HOMEBUILT CCV FILTER, POLAR PAD, 02 AIRBOX, CUMMINS LIFT PUMP, SEGR, PILLAR GAUGE POD, CAT FILTER MONITOR, SPYDER TRAX, ALWAYS A LITTLE TWO STROKE OIL OR BIO, WATER/METH INJECTION

Danoid has posted that a couple of times - (actually he gutted the replay so it looks stock)

Search is your friend

_________________
2005 CRD
stuff
Skeptic quod gratis asseritur, gratis negatur

Point being everyone unpluged there units? I thought maybe there was reason for not pulling relay. Like maybe it runs some other item on jeep.

Pull the relay, misplace the relay, need the heater? buy a new relay. Unplug the wire & you always know where it is.

_________________
06 LIMITED 100000miles, MAGNAFLOW, HOMEBUILT CCV FILTER, POLAR PAD, 02 AIRBOX, CUMMINS LIFT PUMP, SEGR, PILLAR GAUGE POD, CAT FILTER MONITOR, SPYDER TRAX, ALWAYS A LITTLE TWO STROKE OIL OR BIO, WATER/METH INJECTION

x2. I may re-connect my heater since it is winter now and I have a lift pump, so I'm not worried about air in the fuel or a leaking head... But for those who lack the lift pump, just unplug the connector. Its a 2-second preventative fix to a debilitating problem.

_________________
Proud supporting vendor of LOST Jeeps
TRAVELING CRD TECH. I come to you!
Need help? Just ask! I've taken it apart more than most.
Email jeep [at] maincomputer [dot] com - BOARD MESSAGING IS BROKEN
Over 225 CRDs currently driving with my valves, timing belt, rockers, or ARP Studs.
Bad noises = REALLY bad things.