| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| off road encounter, and the CRD did great!! http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=5109 |
Page 1 of 1 |
| Author: | Ripple [ Sat Jan 21, 2006 11:03 pm ] |
| Post subject: | off road encounter, and the CRD did great!! |
Since I picked up my CRD is has seen mostly street miles (2400 of them), till today. you would think that a nice, easy 4x4 trail in the home of the jeep would be easy to find, but it's really not. I finally found a nice little trail in the back of a water reservoir public park. to access the trail I had to drive over a big pile of leaves, atleast 4 ft high and 3 ft wide. no problem for the libby, and with boosted confidence I pressed on. After happily motoring though muddy trenches and hills I came upon the biggest obstacle of the day. a huge tree fell in the trail and there where large ruts on either side. I put it in 4 low, eased the go-pedal and the jeep literally jumped over the tree!! I wish I would have had a camera!! afterwards I noticed that I dented my oil filter and some other stuff, well earned battle scars, I can't wait to go out again!! -Corey |
|
| Author: | oz_crd [ Sat Jan 21, 2006 11:34 pm ] |
| Post subject: | |
Dented your oil filter? Man, you are lucky you didnt 'knock your oil filter off and destroy your engine.' We have had a lot of discussion on this board about the vulnerable placement of the filter on the CRD. I would recommend getting skid plates before any more off-road endeavors! |
|
| Author: | LibertyCRD [ Sun Jan 22, 2006 4:09 pm ] |
| Post subject: | |
This is why the week I brought my CRD home last May I immediately ordered the transmission skid plate to cover that oil filter. What a stupid place to put the oil filter on a 4x4 vehicle!! One hole in that oil filter and you are walking home (and maybe buying a new engine). Awesome story. Glad you love your CRD. But I would also recommend putting the transmission skid plate on your Jeep immediately! |
|
| Author: | Ripple [ Sun Jan 22, 2006 8:02 pm ] |
| Post subject: | |
I'm looking for some nice skids, I may just make my own if i can find some suitable scrap somewhere. Is it right that the gasser tranny skid plate will not fit the CRD? the filter is dented on the back, kinda weird since I never backed up on the trail. I'll definitely be more careful, even with skids under it. |
|
| Author: | spoonplugger1 [ Sun Jan 22, 2006 8:35 pm ] |
| Post subject: | |
The skids are identical, the year of manufacture makes a difference. 2004 and earlier same skid. 2005-06 same skid. the Jeep tranny skid at your dealer fits the 2005-06 rigs. Only the aftermarket originally had the tranny skid and you had to modify them to fit the newer rigs. Now I think they have the heavy duty aftermarket skids for the 2005 and newer. |
|
| Author: | Ripple [ Mon Jan 23, 2006 9:29 pm ] |
| Post subject: | |
thanks i'll get some stock ones then. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|