| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Optima dead... Want a P4 but the tray isnt long enough...... http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=51641 |
Page 1 of 1 |
| Author: | CRD Joe [ Tue Apr 06, 2010 6:26 pm ] |
| Post subject: | Optima dead... Want a P4 but the tray isnt long enough...... |
Ok how are you guys who use the Diehard (read Oddyssey) P4 making them fit? The tray is 10 inches long and the P4 is 11 inches. Tom |
|
| Author: | RJM [ Tue Apr 06, 2010 7:59 pm ] |
| Post subject: | Re: Optima dead... Want a P4 but the tray isnt long enough...... |
Item #22850034 Die Hard platinum grp. 34 fits no problem. |
|
| Author: | CRD Joe [ Tue Apr 06, 2010 10:59 pm ] |
| Post subject: | Re: Optima dead... Want a P4 but the tray isnt long enough...... |
Thanks.. It did indeed fit just fine. |
|
| Author: | tjkj2002 [ Tue Apr 06, 2010 11:16 pm ] |
| Post subject: | Re: Optima dead... Want a P4 but the tray isnt long enough...... |
CRD Joe wrote: Ok how are you guys who use the Diehard (read Oddyssey) P4 making them fit? The tray is 10 inches long and the P4 is 11 inches. Tom Cut battery tray,my KJ is supposed to use a group 25 battery but I have a P4. |
|
| Author: | Sir Sam [ Wed Apr 07, 2010 1:22 am ] |
| Post subject: | Re: Optima dead... Want a P4 but the tray isnt long enough...... |
I cut the tray on my XJ to fit a bigger battery. Haven't tried it on the KJ. |
|
| Author: | CRD Joe [ Wed Apr 07, 2010 1:31 am ] |
| Post subject: | Re: Optima dead... Want a P4 but the tray isnt long enough...... |
Well it dropped right in... |
|
| Author: | flman [ Wed Apr 07, 2010 7:11 am ] |
| Post subject: | Re: Optima dead... Want a P4 but the tray isnt long enough...... |
tjkj2002 wrote: CRD Joe wrote: Ok how are you guys who use the Diehard (read Oddyssey) P4 making them fit? The tray is 10 inches long and the P4 is 11 inches. Tom Cut battery tray,my KJ is supposed to use a group 25 battery but I have a P4. x2, that was my 1st though, cut the lip off, and let it hang over. |
|
| Author: | nescosmo [ Wed Apr 07, 2010 8:23 pm ] |
| Post subject: | Re: Optima dead... Want a P4 but the tray isnt long enough...... |
CRD Joe wrote: Thanks.. It did indeed fit just fine. P1 is the same without the side terminals. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|