It is currently Fri Oct 23, 2026 9:29 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 29 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Transfer case gear fluid change.
PostPosted: Mon Sep 06, 2010 9:36 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Wed Feb 18, 2009 10:34 am
Posts: 865
Location: Long Island, NY
Last week I finally got around to changing the rear diff fluid and now I'm planning on doing the front diff this week and hopefully the trans fluid. I dont know much about oils and fluids and what I do know I've learned here. (thanks!)

The only fluid I've found around my area is the Valvoline ATF+4 for the trans but on the bottle it said ATF+4 for transmissions. Is that what I need for the transfer case? Also what are the folks here using for the trans case and what would you recommend.

Thanks in advance.

_________________
Horse Power: How fast you hit a wall.
Torque: How much of the wall you take with you.

06 CRD
OME HD w/clevis top plate
JBA 4.5 UCAs
245/75/16r Goodyear Duratrax
Fumoto Valve, V6 ABM
Rock Lizard Super Skinks
Cobra 75 WX ST
ECO GDE tune, 2.5 straight piped
ProVent, Samcoed
Non F37ed TCM
DieHard P1


Last edited by VMKJCRD on Mon Sep 06, 2010 9:58 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: Transfer care gear fluid change.
PostPosted: Mon Sep 06, 2010 9:44 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Sat Apr 01, 2006 9:38 pm
Posts: 12988
Location: Colorado Springs
VMKJCRD wrote:
Last week I finally got around to changing the rear diff fluid and now I'm planning on doing the front diff this week and hopefully the trans fluid. I dont know much about oils and fluids and what I do know I've learned here. (thanks!)

The only fluid I've found around my area is the Valvoline ATF+4 for the trans but on the bottle it said ATF+4 for transmissions. Is that what I need for the transfer case? Also what are the folks here using for the trans case and what would you recommend.

Thanks in advance.

Use the same ATF+4 in the t-case,little less then 2qts needed and takes 5 mins to change.Always remove the fill plug 1st before the drain plug,would suck if you drained the t-case to find out that the fill plug is seized and now no way to refill it.


Top
 Profile  
 
 Post subject: Re: Transfer case gear fluid change.
PostPosted: Wed Oct 13, 2010 8:08 am 
Offline
LOST Member
User avatar

Joined: Mon Jun 28, 2010 8:51 am
Posts: 268
I know this topic is a month old, but would you recommend Mobile 1 Synthetic ATF for the transfer case? I have 1 bottle of it sitting around already(couple months old) and it would be cheaper just to get 1 more.

Thanks!

_________________
2003 Jeep Liberty Freedom Edition
3.7L 5 speed manual
OME 927/948 w/Bilsteins
245/75/16 Goodyear Duratracs


Top
 Profile  
 
 Post subject: Re: Transfer case gear fluid change.
PostPosted: Wed Oct 13, 2010 11:08 am 
Offline
LOST Addict

Joined: Thu Oct 20, 2005 5:42 am
Posts: 2122
Location: Fort Collins, CO
It should be fine to use it, but I would just get a bottle of the correct ATF+4 to put in with it. They will mix with no problems. Then you will at least be closer to the spec fluid.

_________________
05CRD: GDE Hot ECU & TCM tunes, Provent, Cat filter, Facet lift pump, TransGo kit, Florida TC, Samcos, stainless brake lines, HDS thermostat, Renegade light bar,
Bilstein adjustables, Al's Gen 4.5 Arms, 235/85-16 Duratracs, DTT rear, Elocker front, EVIC+TPMS, Turbo timer, McNally pillar gauges, Weeks Stage II kit.


Top
 Profile  
 
 Post subject: Re: Transfer case gear fluid change.
PostPosted: Wed Oct 13, 2010 11:17 am 
Offline
LOST Member
User avatar

Joined: Mon Jun 28, 2010 8:51 am
Posts: 268
CATCRD wrote:
It should be fine to use it, but I would just get a bottle of the correct ATF+4 to put in with it. They will mix with no problems. Then you will at least be closer to the spec fluid.


Either way the transfer case doesn't specifically use everything in ATF+4 right? I searched around and the general thought that I got was that any ATF in the transfer case should be fine. I was hoping tjkj2002 would reaffirm this since he seems very knowledgable on these subjects.

_________________
2003 Jeep Liberty Freedom Edition
3.7L 5 speed manual
OME 927/948 w/Bilsteins
245/75/16 Goodyear Duratracs


Top
 Profile  
 
 Post subject: Re: Transfer case gear fluid change.
PostPosted: Wed Oct 13, 2010 11:34 am 
Offline
LOST Addict

Joined: Thu Oct 20, 2005 5:42 am
Posts: 2122
Location: Fort Collins, CO
The owner's manual specifies ATF+4 for the transfer case. Did you check that?

_________________
05CRD: GDE Hot ECU & TCM tunes, Provent, Cat filter, Facet lift pump, TransGo kit, Florida TC, Samcos, stainless brake lines, HDS thermostat, Renegade light bar,
Bilstein adjustables, Al's Gen 4.5 Arms, 235/85-16 Duratracs, DTT rear, Elocker front, EVIC+TPMS, Turbo timer, McNally pillar gauges, Weeks Stage II kit.


Top
 Profile  
 
 Post subject: Re: Transfer case gear fluid change.
PostPosted: Wed Oct 13, 2010 11:56 am 
Offline
LOST Member
User avatar

Joined: Mon Jun 28, 2010 8:51 am
Posts: 268
CATCRD wrote:
The owner's manual specifies ATF+4 for the transfer case. Did you check that?


Yes I did. I was just wondering about Mobil 1 Synthetic ATF since I thought I read on here it should be fine. Is Mobil 1 Synthetic ATF fine for ATF +4 applications? If not, I'll have to go exchange it. :?

_________________
2003 Jeep Liberty Freedom Edition
3.7L 5 speed manual
OME 927/948 w/Bilsteins
245/75/16 Goodyear Duratracs


Top
 Profile  
 
 Post subject: Re: Transfer case gear fluid change.
PostPosted: Wed Oct 13, 2010 2:07 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Thu Apr 16, 2009 2:17 pm
Posts: 1334
Location: Cle Elum, Washington
TJKJ always provides great insite. Im going to do mine soon too.

_________________
2006 KJ CRD Ltd - Suncoast, GDE Eco, EGR Delete, After market T-Stat, Skid Row skids, V6 airbox, 2.5" Turbo back
2005 KJ CRD Sport-Suncoast, Transco, GDE Hot-GDE Trans, EGR Delete, Skid Row skids, V6 airbox, 2.5" Turbo back, After market S-Stat
1987 Suzuki LWB Samurai -diesel powered, custom 4 link coil suspension 38.5 SX Swampers


Top
 Profile  
 
 Post subject: Re: Transfer case gear fluid change.
PostPosted: Wed Oct 13, 2010 4:54 pm 
Offline
LOST Newbie

Joined: Fri Jun 04, 2010 1:51 pm
Posts: 94
Location: Cold Lake, Alberta
You guys have checked here right?

http://www.centerforqa.com/

_________________
Ian

2005 KJ Renegade, ARB'd, OME'd, Rancho'd, Warn'd, skid'd, JBA 4.5s, Cragar Soft 8s, GY MTs 31x10.5x15, and dirty, can't forget the dirty.


Top
 Profile  
 
 Post subject: Re: Transfer case gear fluid change.
PostPosted: Wed Oct 13, 2010 5:46 pm 
Offline
LOST Addict

Joined: Thu Oct 20, 2005 5:42 am
Posts: 2122
Location: Fort Collins, CO
LetFreedomRing wrote:
CATCRD wrote:
The owner's manual specifies ATF+4 for the transfer case. Did you check that?


Yes I did. I was just wondering about Mobil 1 Synthetic ATF since I thought I read on here it should be fine. Is Mobil 1 Synthetic ATF fine for ATF +4 applications? If not, I'll have to go exchange it. :?


Mobil 1 ATF is not certified for ATF+4 applications, if that's what you're asking. Mobil just claims that it is nearly universal. ATF+4 is synthetic, so you can just get another bottle and pour it in without worrying. If you're worried, just exchange it and get 2 quarts of ATF+4. A couple companies make it now.

_________________
05CRD: GDE Hot ECU & TCM tunes, Provent, Cat filter, Facet lift pump, TransGo kit, Florida TC, Samcos, stainless brake lines, HDS thermostat, Renegade light bar,
Bilstein adjustables, Al's Gen 4.5 Arms, 235/85-16 Duratracs, DTT rear, Elocker front, EVIC+TPMS, Turbo timer, McNally pillar gauges, Weeks Stage II kit.


Top
 Profile  
 
 Post subject: Re: Transfer case gear fluid change.
PostPosted: Wed Oct 13, 2010 5:59 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Apr 18, 2008 8:46 pm
Posts: 1778
Location: Queens, New York
What about Amsoil's ATF? Does anyone know if it meets the ATF+4 standards?

Edit:
http://www.amsoil.com/storefront/atf.aspx wrote:
APPLICATIONS
AMSOIL Synthetic Multi-Vehicle ATF is recommended for transmissions, hydraulics, power steering and other applications requiring any of the following specifications:
• Chrysler ATF+4®
• GM DEXRON® III-H
• Ford MERCON® & MERCON V
• Toyota Type T-III and T-IV
• Honda Z-1 (Not CVT)
• Diamond SP II & III (Mitsubishi/Hyundai/Kia)
• Mazda ATF-III, ATF-MV
• Subaru ATF, ATF-HP
• Nissan Matic D, J & K
• Idemitsu K-17
• BMW LA2634
• LT 71141
• Audi G-052-025-A2 & G-052-162-A1
• Volvo 97340
• MB 236.1, 236.2, 236.5, 236.6, 236.7, 236.9 & 236.10
• JWS 3309
• NAG 1
• ETL-7045E, ETL-8072B & N402
• Voith 55.6335.XX (G607, G1363)
• ZF TE-ML 03D, 04D, 09, 14A, 14B, 14C, 16L, 17C
• Allison C-4, TES 389
• Mopar AS68RC


I guess it is ok then?

_________________
-dbk
SOLD2007 6 Speed - Projector Retrofit -Custom LED Tail Lights - Lights on Cowl & 130w 8" ProComps - Full Skids-RockLizard Super Skink Sliders-Front Hitch
Frankenlifted-Al's A-Arms-Goodyear Duractracs 31x10.5R15x7 Cragar D Window 4"bs-Cobra 75WXST - 4' Firestick
4.10s sitting in a box - 3

Sold-1988 Suzuki Samurai
2002 Jeep TJ


Top
 Profile  
 
 Post subject: Re: Transfer case gear fluid change.
PostPosted: Wed Oct 13, 2010 6:25 pm 
Offline
LOST Addict

Joined: Thu Oct 20, 2005 5:42 am
Posts: 2122
Location: Fort Collins, CO
Amsoil recommends their ATF for all those applications. They do not have an ATF+4 license. So no, it is not warranty compliant.

_________________
05CRD: GDE Hot ECU & TCM tunes, Provent, Cat filter, Facet lift pump, TransGo kit, Florida TC, Samcos, stainless brake lines, HDS thermostat, Renegade light bar,
Bilstein adjustables, Al's Gen 4.5 Arms, 235/85-16 Duratracs, DTT rear, Elocker front, EVIC+TPMS, Turbo timer, McNally pillar gauges, Weeks Stage II kit.


Top
 Profile  
 
 Post subject: Re: Transfer case gear fluid change.
PostPosted: Wed Oct 13, 2010 6:33 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Apr 18, 2008 8:46 pm
Posts: 1778
Location: Queens, New York
CATCRD wrote:
Amsoil recommends their ATF for all those applications. They do not have an ATF+4 license. So no, it is not warranty compliant.

OK. So it's not warranty compliant.
But is it transfer case compliant? Will it cause any issues? Or is it ok to use?

_________________
-dbk
SOLD2007 6 Speed - Projector Retrofit -Custom LED Tail Lights - Lights on Cowl & 130w 8" ProComps - Full Skids-RockLizard Super Skink Sliders-Front Hitch
Frankenlifted-Al's A-Arms-Goodyear Duractracs 31x10.5R15x7 Cragar D Window 4"bs-Cobra 75WXST - 4' Firestick
4.10s sitting in a box - 3

Sold-1988 Suzuki Samurai
2002 Jeep TJ


Top
 Profile  
 
 Post subject: Re: Transfer case gear fluid change.
PostPosted: Wed Oct 13, 2010 7:27 pm 
Offline
LOST Addict

Joined: Thu Oct 20, 2005 5:42 am
Posts: 2122
Location: Fort Collins, CO
infernicus wrote:
But is it transfer case compliant? Will it cause any issues? Or is it ok to use?


Nobody knows the answer to that question. Do you think Amsoil has a fleet of Libertys that they're doing long term testing on? The best anyone can tell you is that it will probably be ok because Amsoil makes good oil. Unless you have an Amsoil fetish, just get some ATF+4 at any auto parts store. I don't see any problems with Liberty transfer cases that people are blaming ATF+4, why the unwillingness to use it?

_________________
05CRD: GDE Hot ECU & TCM tunes, Provent, Cat filter, Facet lift pump, TransGo kit, Florida TC, Samcos, stainless brake lines, HDS thermostat, Renegade light bar,
Bilstein adjustables, Al's Gen 4.5 Arms, 235/85-16 Duratracs, DTT rear, Elocker front, EVIC+TPMS, Turbo timer, McNally pillar gauges, Weeks Stage II kit.


Top
 Profile  
 
 Post subject: Re: Transfer case gear fluid change.
PostPosted: Wed Oct 13, 2010 7:42 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Wed May 24, 2006 6:52 am
Posts: 3442
Location: Columbus, Ohio. USA
My 2000 Cherokee has the same NP242 Selectrack transfer case and it calls for Dexron :jester:

_________________
Atlantic Blue 06 CRD Limited (his)
Joined by a 2000 XJ Classic (hers)


Top
 Profile  
 
 Post subject: Re: Transfer case gear fluid change.
PostPosted: Wed Oct 13, 2010 7:47 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Apr 18, 2008 8:46 pm
Posts: 1778
Location: Queens, New York
CATCRD wrote:
infernicus wrote:
But is it transfer case compliant? Will it cause any issues? Or is it ok to use?
..Nobody knows the answer to that question...

Yeah, I figured as much, lol..
And, no, I don't have an Amsoil fetish :lol: , at least not completely, lol.

I was just getting ready to buy some motor oil and such, and figured I would do it in one trip. 8)

_________________
-dbk
SOLD2007 6 Speed - Projector Retrofit -Custom LED Tail Lights - Lights on Cowl & 130w 8" ProComps - Full Skids-RockLizard Super Skink Sliders-Front Hitch
Frankenlifted-Al's A-Arms-Goodyear Duractracs 31x10.5R15x7 Cragar D Window 4"bs-Cobra 75WXST - 4' Firestick
4.10s sitting in a box - 3

Sold-1988 Suzuki Samurai
2002 Jeep TJ


Top
 Profile  
 
 Post subject: Re: Transfer case gear fluid change.
PostPosted: Thu Oct 14, 2010 12:17 am 
Offline
Lifetime Member
Lifetime Member

Joined: Sat Apr 01, 2006 9:38 pm
Posts: 12988
Location: Colorado Springs
You can run 5w-30 motor oil in your t-case,actually will be better off then using ATF.I run 20w-50 motor in mine(not stock t-case).

They kept it simple and speced the t-case for the exact same ATF that goes in the trans,makes it easier to keep stock.



Oh and no Amsoil should never be used in place of ATF+4.


Top
 Profile  
 
 Post subject: Re: Transfer case gear fluid change.
PostPosted: Thu Oct 14, 2010 7:06 am 
Offline
LOST Member
User avatar

Joined: Mon Jun 28, 2010 8:51 am
Posts: 268
tjkj2002 wrote:
You can run 5w-30 motor oil in your t-case,actually will be better off then using ATF.I run 20w-50 motor in mine(not stock t-case).

They kept it simple and speced the t-case for the exact same ATF that goes in the trans,makes it easier to keep stock.



Oh and no Amsoil should never be used in place of ATF+4.


So I take it Mobil 1 ATF would be fine to use then? Since it doesn't seem like the transfer case needs ATF +4...

Thanks for the input tjkj2002.

_________________
2003 Jeep Liberty Freedom Edition
3.7L 5 speed manual
OME 927/948 w/Bilsteins
245/75/16 Goodyear Duratracs


Top
 Profile  
 
 Post subject: Re: Transfer case gear fluid change.
PostPosted: Thu Oct 14, 2010 8:01 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Wed May 24, 2006 6:52 am
Posts: 3442
Location: Columbus, Ohio. USA
tjkj2002 wrote:
You can run 5w-30 motor oil in your t-case,actually will be better off then using ATF.I run 20w-50 motor in mine(not stock t-case).


I have a SelectTrack on my high mileage XJ. If your running 20w-50 would I see better shifting from 4 full time to 2wd with say 10w30 and is there a downside?

Thanks
Joe

_________________
Atlantic Blue 06 CRD Limited (his)
Joined by a 2000 XJ Classic (hers)


Top
 Profile  
 
 Post subject: Re: Transfer case gear fluid change.
PostPosted: Thu Oct 14, 2010 9:48 am 
Offline
Lifetime Member
Lifetime Member

Joined: Sat Apr 01, 2006 9:38 pm
Posts: 12988
Location: Colorado Springs
Joe Romas wrote:
tjkj2002 wrote:
You can run 5w-30 motor oil in your t-case,actually will be better off then using ATF.I run 20w-50 motor in mine(not stock t-case).


I have a SelectTrack on my high mileage XJ. If your running 20w-50 would I see better shifting from 4 full time to 2wd with say 10w30 and is there a downside?

Thanks
Joe

No

Only use heavy weight oils in gear to gear t-cases like I have(AtlasII).


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 29 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Majestic-12 [Bot] and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com