It is currently Mon Oct 26, 2026 4:20 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: BMW Cyclonic Air/Oil Separator plumbing question
PostPosted: Tue Jul 10, 2012 8:18 am 
Offline
LOST Newbie

Joined: Mon Nov 14, 2011 9:23 pm
Posts: 27
Location: Upstste SC
I originally bought the clear 3/4" hose to do the EHM but later decided to get the BMW Cyclonic Air/Oil Separator. Would it be OK to use the clear hose to plumb in the BMW separator or do I need a different type of hose?

Thanks!

_________________
2005 Liberty Sport CRD
Full factory skids, Fumoto F-102S, factory rear posi, muffler-b-gone, more to come!


Top
 Profile  
 
 Post subject: Re: BMW Cyclonic Air/Oil Separator plumbing question
PostPosted: Tue Jul 10, 2012 10:54 am 
Offline
LOST Member
User avatar

Joined: Thu Jul 30, 2009 9:26 am
Posts: 347
Location: MN
Toolmaker wrote:
I originally bought the clear 3/4" hose to do the EHM but later decided to get the BMW Cyclonic Air/Oil Separator. Would it be OK to use the clear hose to plumb in the BMW separator or do I need a different type of hose?

Thanks!


Is your clear hose rated for petroleum? If it is... you will have no problems at all. If it is not rated, you may get some deterioration after a while.

_________________
-Rich
It must be air in the fuel!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com