| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| FCV http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=55870 |
Page 1 of 1 |
| Author: | CBASE [ Sun Sep 26, 2010 11:49 pm ] |
| Post subject: | FCV |
Anyone have a new or used flow control valve that they are willing to part with? I have tried to order it and the date has been pushed back twice now to beginning to mid october, also raised the price. Lovely that you now have to smog in Cali, mine is due now, and the part has gone out after being stuck for a while. Thanks Chris |
|
| Author: | BlackLibertyCRD [ Mon Sep 27, 2010 1:17 am ] |
| Post subject: | Re: FCV |
Try sending a pm to geordi. He has a used engine he is selling parts off of. |
|
| Author: | audiboy86 [ Mon Sep 27, 2010 10:25 am ] |
| Post subject: | Re: FCV |
Try partspool.com just put your part number in and they will connect you directly with the distributor or manufacture. |
|
| Author: | salden77 [ Mon Sep 27, 2010 3:09 pm ] |
| Post subject: | Re: FCV |
were is the FCV located? |
|
| Author: | dgeist [ Mon Sep 27, 2010 4:45 pm ] |
| Post subject: | Re: FCV |
salden77 wrote: were is the FCV located? Left side of the block, just behind and inboard from the battery tray, sort of right over the side of the engine from the alternator. It forms the joint between the cool-side intercooler hose and the intake manifold right where the EGR pipe snakes up from underneath and looks like a little throttle assembly with a servo motor box attached to the side of it (since that's what it it is). Dan |
|
| Author: | geordi [ Mon Sep 27, 2010 4:47 pm ] |
| Post subject: | Re: FCV |
PM replied to, hopefully I can help him out with the geniuses in "kaliforniastan" |
|
| Author: | Drewd [ Wed Sep 29, 2010 1:08 am ] |
| Post subject: | Re: FCV |
I should have a used FCV leftover in my parts bin that i will sell for cost of shipping only. |
|
| Author: | geordi [ Wed Sep 29, 2010 4:33 pm ] |
| Post subject: | Re: FCV |
Drewd wrote: I should have a used FCV leftover in my parts bin that i will sell for cost of shipping only. That would be a heck of a deal for the next person, mine is shipped out! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|