Good job Manuel
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| no ticky http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=55938 |
Page 1 of 1 |
| Author: | manuel754 [ Wed Sep 29, 2010 9:44 pm ] |
| Post subject: | no ticky |
installed the euro t/c and new flex plate....in my dirt drive way. so far all's well , no chatter shifing into 5th .... yay me! |
|
| Author: | CATCRD [ Wed Sep 29, 2010 10:29 pm ] |
| Post subject: | Re: no ticky |
Nicely done! |
|
| Author: | Sir Sam [ Wed Sep 29, 2010 11:02 pm ] |
| Post subject: | Re: no ticky |
Ah yes, the transmission pull, one of the rites of passage of CRD ownership. |
|
| Author: | DynoPax [ Thu Sep 30, 2010 11:14 am ] |
| Post subject: | Re: no ticky |
Happy for you, did the same on mine (minus the flex) and no problemo ever since... |
|
| Author: | flman [ Thu Sep 30, 2010 5:15 pm ] |
| Post subject: | Re: no ticky |
Good job Manuel
|
|
| Author: | salden77 [ Thu Sep 30, 2010 6:02 pm ] |
| Post subject: | Re: no ticky |
how many hours did it take you? |
|
| Author: | manuel754 [ Thu Sep 30, 2010 6:21 pm ] |
| Post subject: | Re: no ticky |
it took me 1.5 hrs out and 2.5 hrs in .... on my back on a piece of plywood on my dirt driveway. oh yeah , i'm 6'4" and not what one would call dainty .... they dont make these for big people! i put 145 miles on it today and still good.... and ..... the CEL is not on i had the EGR low flow/ underboost code for like 4 months i did a fuel filter change and primed the filter with 911 fuel additive ...i think that desolved the crud and opened up the ports like prime-a-teen mist 
|
|
| Author: | salden77 [ Thu Sep 30, 2010 6:30 pm ] |
| Post subject: | Re: no ticky |
it took me longer than that to take entire intake and throttle body off and clean all the soot out. maybe i can handle it on my own, but im putting it on a lift at a buddys shop and doing it 
|
|
| Author: | salden77 [ Sun Oct 03, 2010 7:21 pm ] |
| Post subject: | Re: no ticky |
manuel before you replaced your stock T/C when you were idling did you notice a ticking sound? does that mean i probably need to replace my flex plate as well? |
|
| Author: | manuel754 [ Sun Oct 03, 2010 8:07 pm ] |
| Post subject: | Re: no ticky |
yes ... replace it at once! just kidding mine started out a slight tick then over the coarse of a week turned into a knock then would not drive....it was quick! |
|
| Author: | salden77 [ Sun Oct 03, 2010 8:10 pm ] |
| Post subject: | Re: no ticky |
manuel754 wrote: yes ... replace it at once! just kidding mine started out a slight tick then over the coarse of a week turned into a knock then would not drive....it was quick! o fantastic, mine has been ticking for at least 2 weeks now since i started noticing it, do you know the part number for the flex plate? |
|
| Author: | manuel754 [ Sun Oct 03, 2010 11:48 pm ] |
| Post subject: | Re: no ticky |
sorry dont know part# but ordered from dealer , check the mopar parts website too. i'd inspect the bolts that hold the torque converter to the flex plate ....i felt the need to pull the starter and ft drive shaft, but one guy said that you could pull the rubber inspection cover just above the starter.... |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|