| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Wheels that properly fit CRD's http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=56064 |
Page 1 of 1 |
| Author: | irollgen4s [ Wed Oct 06, 2010 3:34 pm ] |
| Post subject: | Wheels that properly fit CRD's |
So I've personally been searching around trying to find some factory jeep wheels that fit the CRD properly other then the stockers. I figured we could throw this thread together to make it much more simple for any future questions. Will 2010 KK stockers fit the crd? I know you need to have a certain offset or something of the sort otherwise there will be rubbing.. Im looking at the ones in the for sale forum with 225-75-16's. |
|
| Author: | Radman [ Wed Oct 06, 2010 3:57 pm ] |
| Post subject: | Re: Wheels that properly fit CRD's |
No the KK wheels do not have the same bolt pattern. Suggest you post in the wheel and tyre section you will have more luck getting answers. |
|
| Author: | Sir Sam [ Wed Oct 06, 2010 4:14 pm ] |
| Post subject: | Re: Wheels that properly fit CRD's |
According to tire rack and other sources KK wheels are 5x114.3mm = 5x4.5inches = KJ wheel pattern. I'm guessing the backspacing is the same as well, Jeep has been very consistent with that over the years. |
|
| Author: | irollgen4s [ Wed Oct 06, 2010 7:13 pm ] |
| Post subject: | Re: Wheels that properly fit CRD's |
From what the seller has posted the bolt pattern is 5x4.5.. so im assuming thats kj pattern as well? |
|
| Author: | jinstall [ Thu Oct 07, 2010 6:47 am ] |
| Post subject: | Re: Wheels that properly fit CRD's |
I like my Rubicon's I have on now a lot! |
|
| Author: | Glend [ Thu Oct 07, 2010 7:00 am ] |
| Post subject: | Re: Wheels that properly fit CRD's |
Yeah, MOABs 16"*8" with 5 on 4.5 are the go, but there are some copies around like the Mamba ones. |
|
| Author: | LibertyCRD [ Thu Oct 07, 2010 7:39 am ] |
| Post subject: | Re: Wheels that properly fit CRD's |
Almost ALL Jeeps use the 5x4.5 bolt pattern. So they are all able to work on the KJ Liberty (provided that they are 16" wheels or larger so that they won't hit the calipers). The exceptions to the rule are the WJ Grand Cherokees and newer, and the JK Wranglers and newer. Those two models went to a 5x5.0 pattern. But any old Grand Cherokee, Cherokee, Wrangler, Comanche, or any model of Liberty wheels will work. Again, you just gotta' make sure there is brake clearance. Far more interesting would be for somebody to research and find out which AFTERMARKET 15" aluminum wheels will fit the KJ. That would be some valuable information. |
|
| Author: | Radman [ Thu Oct 07, 2010 10:22 am ] |
| Post subject: | Re: Wheels that properly fit CRD's |
Sir Sam wrote: According to tire rack and other sources KK wheels are 5x114.3mm = 5x4.5inches = KJ wheel pattern. I'm guessing the backspacing is the same as well, Jeep has been very consistent with that over the years. I am seeing conflicting information regarding this... I read the KK as having a 5x5 bolt pattern per below: http://www.jk-forum.com/showthread.php? ... n-on-Jeeps Make sure before you purchase. |
|
| Author: | Sir Sam [ Thu Oct 07, 2010 12:50 pm ] |
| Post subject: | Re: Wheels that properly fit CRD's |
Radman wrote: Sir Sam wrote: According to tire rack and other sources KK wheels are 5x114.3mm = 5x4.5inches = KJ wheel pattern. I'm guessing the backspacing is the same as well, Jeep has been very consistent with that over the years. I am seeing conflicting information regarding this... I read the KK as having a 5x5 bolt pattern per below: http://www.jk-forum.com/showthread.php? ... n-on-Jeeps Make sure before you purchase. Thats an old thread, with all sorts of bad conflicting information, personally I would ignore it. Example: Quote: I've heard that the new liberty KK is also 5x5 but not 100% Quote: I think you mean Liberty KJ. And according to Quadratec it is 5x4.5 I do know that the compass/patriot still use 5x4.5, and I think the liberty does. Plus tirerack lists the bolt pattern as 5x4.5. |
|
| Author: | awsumk [ Thu Oct 07, 2010 1:17 pm ] |
| Post subject: | Re: Wheels that properly fit CRD's |
yeah my '08 KK is 5X4.5! |
|
| Author: | DirtyKK [ Thu Oct 07, 2010 1:27 pm ] |
| Post subject: | Re: Wheels that properly fit CRD's |
The KJ and KK share the same 5x4.5 bolt pattern for certain. Whats your location? I have a set of 5 KK wheels with stock tires that have tons of tread still and ive been trying to get rid of them somewhat locally. |
|
| Author: | mag03kj [ Thu Oct 07, 2010 1:38 pm ] |
| Post subject: | Re: Wheels that properly fit CRD's |
DirtyKK wrote: The KJ and KK share the same 5x4.5 bolt pattern for certain. Whats your location? I have a set of 5 KK wheels with stock tires that have tons of tread still and ive been trying to get rid of them somewhat locally. $$$$?? Pictures??? |
|
| Author: | DirtyKK [ Thu Oct 07, 2010 2:16 pm ] |
| Post subject: | Re: Wheels that properly fit CRD's |
I made a FS Thread viewtopic.php?f=35&t=56090 |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|