| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| P1001 Fault Code http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=56181 |
Page 1 of 1 |
| Author: | usa591 [ Mon Oct 11, 2010 5:54 pm ] |
| Post subject: | P1001 Fault Code |
This weekend I installed my GDE Eco Tune with their Code Reader tool--super easy and convenient and can now switch been Eco and Hot when needed. Even though I had no CEL, I scanned for fault codes with the reader and got a "P1001". I poked around here and found: P1001/P1002 - Engine Off Timer Faults ...what exactly is this fault? Everything seems to be running great. -p |
|
| Author: | GreenDieselEngineering [ Tue Oct 12, 2010 7:10 am ] |
| Post subject: | Re: P1001 Fault Code |
The ECU performs diagnostic checks after turning the key off for 5-10 seconds prior to powering down. Sometimes the P1001 will be set if the unit is not powered long enough. It tends to be a random fault. Just use the flash tool to clear the code and it most likely will not return. In either case, it does not set a CEL and will not effect vehicle operation. |
|
| Author: | usa591 [ Tue Oct 12, 2010 11:38 am ] |
| Post subject: | Re: P1001 Fault Code |
...aha. Thanks GDE! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|