LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

CEL Question
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=59006		 Page 1 of 1
Author:  0311_DoC [ Sat Feb 19, 2011 4:00 pm ]
Post subject:  CEL Question
Went to the local Auto Zone to have my CEL checked. It said "NO LINK" on the reader.. Any clue what that means? :?
Author:  GreenDieselEngineering [ Sat Feb 19, 2011 5:26 pm ]
Post subject:  Re: CEL Question
Most likely the diag tool used will not communicate with the CRD. Many scan tools do not function well with the diesel version. You may have to try another auto shop to get a tool that works. Good Luck, hopefully the code is not a major problem.
Author:  scubadvr1999 [ Sun Feb 20, 2011 10:05 am ]
Post subject:  Re: CEL Question
When I use the zone to check my cel they use the lil orange scanner and it usually takes about 2 mins to link up. Make sure ur key is clicked clockwise two clicks to scan. Not one click counterclockwise.
Author:  0311_DoC [ Sun Feb 20, 2011 12:51 pm ]
Post subject:  Re: CEL Question
scubadvr1999 wrote:
When I use the zone to check my cel they use the lil orange scanner and it usually takes about 2 mins to link up. Make sure ur key is clicked clockwise two clicks to scan. Not one click counterclockwise.


My key was in the right position and yes they used the lil orange one. He tried twice to get it to work.
Author:  0311_DoC [ Sun Feb 20, 2011 12:54 pm ]
Post subject:  Re: CEL Question
GreenDieselEngineering wrote:
Most likely the diag tool used will not communicate with the CRD. Many scan tools do not function well with the diesel version. You may have to try another auto shop to get a tool that works. Good Luck, hopefully the code is not a major problem.

GDE, I was worried that the CRD wasn't gonna be the typical easy just plug and and see whats up... :banghead:
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/