| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| lift pump psi http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=60597 |
Page 1 of 1 |
| Author: | TennesseeCRD [ Mon May 09, 2011 3:33 pm ] |
| Post subject: | lift pump psi |
I've seen the recomendations of what type of lift pumps to use. I'm thinking I will go with an inline pump back close to the tank. What psi will be sufficient from the tank location? Thanks |
|
| Author: | warp2diesel [ Mon May 09, 2011 4:57 pm ] |
| Post subject: | Re: lift pump psi |
My Carter puts out 9 PSI and works well. A lot of the other pumps put out ~9 PSI and also work well. The hysteria against pressurizing the inlet of the CP3 with a lift pump around 9 PSI, has died off deader than Osama Bin Laden. |
|
| Author: | papaindigo [ Mon May 09, 2011 5:01 pm ] |
| Post subject: | Re: lift pump psi |
A couple of strings that may be of interest viewtopic.php?f=5&t=26385&hilit=lift+pump and http://liberty.eurekaboy.com/kennedy.htm Consensus seems to be 4-7psi is sufficient much more may be a problem although there is apparently a return flow line for excess fuel. |
|
| Author: | warp2diesel [ Mon May 09, 2011 6:39 pm ] |
| Post subject: | Re: lift pump psi |
papaindigo wrote: A couple of strings that may be of interest viewtopic.php?f=5&t=26385&hilit=lift+pump and http://liberty.eurekaboy.com/kennedy.htm Consensus seems to be 4-7psi is sufficient much more may be a problem although there is apparently a return flow line for excess fuel. There is a pressure drop when the fuel goes through the filter. |
|
| Author: | onthehunt [ Tue May 10, 2011 11:29 am ] |
| Post subject: | Re: lift pump psi |
Quote: The hysteria against pressurizing the inlet of the CP3 with a lift pump around 9 PSI, has died off deader than Osama Bin Laden. After 6 years I'm still waiting for the "Not having a aux. lift pump caused my injection pump to fail" post. Hysteria runs rampant here on many things... |
|
| Author: | tulsa [ Mon May 16, 2011 10:54 pm ] |
| Post subject: | Re: lift pump psi |
warp2diesel wrote: My Carter puts out 9 PSI and works well. A lot of the other pumps put out ~9 PSI and also work well. The hysteria against pressurizing the inlet of the CP3 with a lift pump around 9 PSI, has died off deader than Osama Bin Laden. Is OBL still dead? L I B |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|