| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Transmission Temp Sensor http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=60799 |
Page 1 of 1 |
| Author: | VeggieLiberty [ Thu May 19, 2011 9:08 pm ] |
| Post subject: | Transmission Temp Sensor |
I'm going to be upgrading my transmission pan, and was hoping to order the model below tomorrow. http://www.yourcovers.com/transpan_11039.php The only hang up is the temp sensor. I've searched everywhere, but I can't seem to find a temp sensor for the liberty. I may be asking the wrong questions still, but what are the dimensions of the stock temp sensor? Should I change it when I change the pan? Stock or upgrade? Where can i find more info on these things? My vehicle is going into the garage next Friday and needs to have the parts with it. Thank you. |
|
| Author: | Glend [ Thu May 19, 2011 11:43 pm ] |
| Post subject: | Re: Transmission Temp Sensor |
The 'stock' temp sensor is built into the electronic innards of the transmission and cannot be changed or accessed separately. I added a temp sensor to my pan using a standard B&M transmission fdrain fitting that is tapped for an 1/8 npt plug - which the Prosport temp sender unit screws into very nicely. The sensor is run back to my Prosport temp gauge. If you have something like the Bullly Dog unit you can display the internal temp sensor output. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|