| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Help With Lift http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=61084 |
Page 1 of 1 |
| Author: | Rabert [ Mon Jun 06, 2011 6:48 pm ] |
| Post subject: | Help With Lift |
So I dropped the struts off at a local shop to have OME790s installed. Picked them up and the guy installed the 790s with the rubbers in the same location which made the clevis notch misaligned with the top plate. Obviously the strut plate will not rotate due to the notch. But, shouldn't the top plate rubber come loose and one would be able to rotate the top plate to align the strut? Am I missing something here? I took them back stating this is how to align it but it got a lot of grumblings. SO, question is " Shouldn't one be able to rotate the top plate by removing the top plate rubber?" Thanks |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|