| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Another exhaust question http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=61598 |
Page 1 of 1 |
| Author: | Toolin Customs [ Sun Jul 10, 2011 6:51 pm ] |
| Post subject: | Another exhaust question |
I'm looking for a turbo down pipe ( stock size ) for my 05 CRD. I would like to have it all the way to the cat or dpf or resonator, what ever its called. If it is this length i'm assuming it will have that section of flex in it? I'm re-doing the exhaust from turbo back, and deleting the (cat/dpf/resonator) Sorry for the lack of knowledge in termonolgy. Im new to these . Thanks for the help in advance. |
|
| Author: | dgeist [ Tue Jul 12, 2011 10:10 am ] |
| Post subject: | Re: Another exhaust question |
Toolin Customs wrote: I'm looking for a turbo down pipe ( stock size ) for my 05 CRD. I would like to have it all the way to the cat or dpf or resonator, what ever its called. If it is this length i'm assuming it will have that section of flex in it? I'm re-doing the exhaust from turbo back, and deleting the (cat/dpf/resonator) Sorry for the lack of knowledge in termonolgy. Im new to these . Thanks for the help in advance. Not sure what you're exactly asking here... first thing: there's no DPF on the CRDs, just a turbo, Catalytic converter, muffler (resonator) and pipes. You can probably take the entire system out and mock-up a 2.5" stainless replacement for everything. Don't forget to put in a flexible coupling near the bottom of the pipe run around the engine cross-member to deal with engine movement and vibration. Most places don't seem to blink if you delete the exhaust (but some do). MOST places will have a problem if they inspect it and find that you have no Cat. Dan |
|
| Author: | Toolin Customs [ Tue Jul 12, 2011 11:00 am ] |
| Post subject: | Re: Another exhaust question |
Thanks, Like I said I was not sure what to call the converter, Ive had some people tell me its a resonator and others a dpf, Hence the confusion. I already have a 2.5 inch tailpipe piece and muffler, So what I'm looknig for is the stock 2.5 inch down pipe that already has the flare for the fitting at the turbo and with that flex piece by the cross member that ends at the flange fitting for the cat. From there i was going to make myself a flange to bolt directly to that, to my muffler. Sorry for any confusion. Thanks |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|