LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Rear timing belt cover gaskets
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=62154		 Page 1 of 1
Author:  Tinman [ Fri Aug 19, 2011 1:56 pm ]
Post subject:  Rear timing belt cover gaskets
Timing belt change coming up. I plan on doing the water pump by removing the rear belt cover. FSM mentions two gaskets for the rear timing belt cover - block interface. Do those need to be replaced? I've got all the other parts in waiting.
Author:  jeepdan [ Fri Aug 19, 2011 2:49 pm ]
Post subject:  Re: Rear timing belt cover gaskets
The gaskets behind the rear cover are more of a dust seal than anything else. One is paper and the others are a foam gasket.
You can sparingly use a bead of silicone to refresh the foam seals. And also to repair the paper gasket if you tear it.
Replace the gaskets the next time at 200,000 miles. :D
Author:  Tinman [ Sat Aug 20, 2011 8:09 pm ]
Post subject:  Re: Rear timing belt cover gaskets
I guess I can use some ultra hi-temp RTV. That's what comes from the factory on the front gear case on my 06 Cummins. I've had that thing off twice and RTV works fine.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/