I just purchased a wrecked 2005 CRD. PO ran into a small tree just hard enough to push the bumper support in, and break the plastic driver-side to the a/c condensor, intercooler, and radiator. None of my local u-pick-it yards have anything that will work. I'd like to have original, or at least close to fitting correctly as it should. From what I've read, the a/c condensor, electric fan, mechanical fan shroud, radiator, and intercooler are all specific to a CRD, is that correct?
Also - does anyone have a good source for any of those parts cheap?

_________________
05 Liberty CRD - Sold
07 WK CRD - Family SUV

Those three are all CRD specific. But you never know you might be able to fit a V6 radiator in with a aftermarket intercooler. Like one the import turbo cars use. Might have room to mount one with custom intercooling tubing. Just a thought.

_________________
SOLD 11/21/13 White '06 Jeep KJ CRD<--Way to much $ spent here
84 Ranger 2.2L Perkins (Eaton Supercharger build) http://north76.proboards.com/thread/884 ... sel-ranger
89 W250 5.9L Cummins
97 F350 7.3L PSD
00 Excursion 7.3L PSD
01 F350 5.9L Cummins
(Gassers: 66 Chevelle SS, 66 Buick Wagon, 72 Nova, 80 Trans Am, 89 Bronco II)

Thanks. I ended up finding a salvage yard in Wisconsin that had a wrecked CRD. Picked up most of the parts I needed from them, the rest I ordered from moparonlineparts.com, rockauto.com, autopartswarehouse.com, and a little upgrade from boostcontroller.com for SAMCO hoses. Also renting the tools I need to change the water pump and timing belt/pulleys from GDE. 137k miles on all original... yikes

_________________
05 Liberty CRD - Sold
07 WK CRD - Family SUV

I think the shroud is shared. About $30 from Rock Auto. The rest is CRD specific so be prepared to get raped by the dealer.

_________________
Share your ideas freely at https://www.facebook.com/groups/libertydiesels/