| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Rear end problems http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=64875 |
Page 1 of 1 |
| Author: | lastoch [ Wed Jan 25, 2012 6:54 pm ] |
| Post subject: | Rear end problems |
Has anyone had issues with the rear end going out? Mine started clunking real bad today without warning. I plan to open it up later I'll give you an update on what I find. Chris L 2006 CRD 100,015 miles (100,000 miles and it fell apart) lol
|
|
| Author: | audiboy86 [ Wed Jan 25, 2012 7:59 pm ] |
| Post subject: | Re: Rear end problems |
The only way you should have rear end problems this early on is someone doing a crappy job in reinstalling. Or ran it out of gear oil without knowing it. Both of them will cause early bearing failure which could be giving you that clunk from the rear. |
|
| Author: | Smetna [ Wed Jan 25, 2012 8:01 pm ] |
| Post subject: | Rear end problems |
Try preparation H |
|
| Author: | msilbernagel [ Wed Jan 25, 2012 9:04 pm ] |
| Post subject: | Re: Rear end problems |
Depending upon miles (etc), the clunking could be the ball joint in the center of the rear upper control arm - which means the whole rear-end is rotating forward and backward a bit. Check the rear lower control arms too - mine got so bad that there was significant torque steer. Mark |
|
| Author: | lastoch [ Wed Jan 25, 2012 11:09 pm ] |
| Post subject: | Re: Rear end problems |
After pulling the cover off and looking at the gears everything looks fine. I think the skipping and clunking is coming from the transfer case. Is there anyway to drop the transfer case and just make the jeep 2wd till I have time and can afford to get it fixed? Ugh... Chris L |
|
| Author: | tjkj2002 [ Thu Jan 26, 2012 12:25 pm ] |
| Post subject: | Re: Rear end problems |
lastoch wrote: After pulling the cover off and looking at the gears everything looks fine. I think the skipping and clunking is coming from the transfer case. Is there anyway to drop the transfer case and just make the jeep 2wd till I have time and can afford to get it fixed? Ugh... Chris L Would cost as much as fixing it. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|