LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Boost gauge solution
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=64896		 Page 1 of 1
Author:  luckynumber5 [ Fri Jan 27, 2012 3:34 am ]
Post subject:  Boost gauge solution
I have been lurking for a while now and haven't really seen a solution for an easy way to tap into the intake for a boost gauge reference. Well I ran across this a few days ago and ordered one
Image
http://www.atpturbo.com/mm5/merchant.mv ... gory_Code=

I will be installing it when it comes in tomorrow, I thought of trying the same thing with some pipe fittings from Lowes but the holes would have been a bit big and I was worried the intercooler hose wouldn't be able to handle that without splitting.

Hope this helps someone :)
Author:  msilbernagel [ Fri Jan 27, 2012 3:59 am ]
Post subject:  Re: Boost gauge solution
Nice!

Thanks
Author:  racertracer [ Fri Jan 27, 2012 4:23 am ]
Post subject:  Re: Boost gauge solution
Super find.
Author:  DOC4444 [ Fri Jan 27, 2012 9:18 am ]
Post subject:  Re: Boost gauge solution
No need to drill anything with "Torque" that reads boost electronically from the ECU.

DOC
Author:  CATCRD [ Sun Jan 29, 2012 4:36 pm ]
Post subject:  Re: Boost gauge solution
luckynumber5 wrote:
I have been lurking for a while now and haven't really seen a solution for an easy way to tap into the intake for a boost gauge reference. Well I ran across this a few days ago and ordered one

I will be installing it when it comes in tomorrow, I thought of trying the same thing with some pipe fittings from Lowes but the holes would have been a bit big and I was worried the intercooler hose wouldn't be able to handle that without splitting.

Hope this helps someone :)


Here's how I did mine:
viewtopic.php?f=5&t=62144
Author:  luckynumber5 [ Mon Jan 30, 2012 2:13 am ]
Post subject:  Re: Boost gauge solution
^ I like those gauges, your install looks great!

Got mine installed and wired in earlier today, works great. Its a little tricky getting the piece pushed through the intercooler hose but its not a terrible ordeal at all.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/