Today i planning to drop my gas tank so I can change out these lines. Can I just drop it partially then change them or or disconnect everything and lower to the ground? This is my last step in trying to fix the stalling issues. AK

_________________
2005 CRD Sport 4x4
EHM,ORM,Straight pipe exhaust,Facet 40109 lift pump

If you can put it up on jack stands and go under it from the driver's side in front of the axle, you might be able to drop the front of the tank without disconnecting the filler tube... and get access to the connectors.

Did you get new or different connectors?

Mark

_________________
--
2005 Liberty CRD
2004.5 Cummins 5.9L TD, F1s, NV5600 6-speed in a '93 GMC Suburban

Thanks for the input and yes I put new OME lines on. Test driving it today and hope this fixes the stalling out issue. AK

_________________
2005 CRD Sport 4x4
EHM,ORM,Straight pipe exhaust,Facet 40109 lift pump

Well it didn't fix it. Maybe injectors as talked about on Mozzio post since he just about replaced everything. Except I have no starting issue just stalling once way from home.AK

_________________
2005 CRD Sport 4x4
EHM,ORM,Straight pipe exhaust,Facet 40109 lift pump